Adsorption behavior of rice husk for the decontamination of chromium from industrial effluents

Rice husk, an agricultural waste product, was studied as a potential decontaminant for chromium in the effluents of leather tanning industries. Physico-chemical parameters such as selection of appropriate electrolyte, shaking time, concentration of adsorbent and adsorbate were studied to optimize the best conditions in which this material can be utilized on commercial scale for the decontamination of effluents. The radiotracer technique was used to determine the distribution of chromium. In certain cases atomic absorption spectrophotometry was also employed. Maximum adsorption was observed at 0.01 mol dm(-3) acid solutions (HNO3, HCl, H2SO4 and HClO4) using 3.0 g of adsorbent for 2.73 10(-3) mol dm(-3) chromium concentration in five minutes equilibration time Studies show that the adsorption decreases with the increase in the concentrations of all the acids. The adsorption data follows the Freundlich isotherm over the range of 2.73 10(-3) to 2.73 10(-2) mol dm(-3) chromium concentration. The characteristic Freundlich constants, i.e., 1/n = 0.86 +/- 0.06 and A = 2.35 +/- 0.06 mmol g(-1) have been computed for the sorption system. Thermodynamic parameters, i.e., Delta G(o), Delta S-o and Delta H-o have also been calculated for the system. Application of the method to a test case of a medium size industry showed that 21 kg of rice husk was sufficient to maintain the NEQS limits of chromium for industrial effluents.