Characterization of the W2C phase formed during the high velocity oxygen fuel spraying of a WC+12 pct Co powder

被引:150
作者
Guilemany, JM [1 ]
de Paco, JM [1 ]
Nutting, J [1 ]
Miguel, JR [1 ]
机构
[1] Univ Barcelona, Dept Chem & Met Engn, Thermal Spray Ctr, E-08028 Barcelona, Spain
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1999年 / 30卷 / 08期
关键词
D O I
10.1007/s11661-999-0002-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A variety of experimental techniques have been used to study a WC-12 pet Co powder and the coatings produced by high velocity oxygen fuel (HVOF) spraying of the powder onto a steel substrate, Many of the structural characteristics of the powder were also found in the coating. However, when the metallic matrix of the powder was melted during thermal spraying, the carbides were partially dissolved and a very heterogeneous liquid phase was produced in which the W/C ratio varied from about 1 to 4. These variations have been Linked with oxidation of the liquid phase during spraying. The factors influencing the formation of W2C in the coating have been identified as (1) an in situ transformation of WC into W2C maintaining the original WC faceted morphology and (2) the precipitation of W2C from the W-rich liquid phase matrix as the coating cools. A cobalt containing carbide of the M6C-M12C type has also precipitated from the liquid phase when the W/C and W/Co ratios were high.
引用
收藏
页码:1913 / 1921
页数:9
相关论文
共 14 条
  • [1] DETERING BA, 1990, P 3 NAT THERM SPRAY, P27
  • [2] Fincke J. R., 1994, P 7 NAT THERM SPRAY, P325
  • [3] GUILEMANY JM, 1995, EUROMAT 95 ASS IT ME, V2, P395
  • [4] GUILEMANY JM, 1997, MEM BIEN SOC ESP MIC, V1, P121
  • [5] GUILEMANY JM, 1996, P THERM SPRAYING 96, V1, P390
  • [6] PARTICLE BEHAVIOR DURING HIGH-VELOCITY OXY FUEL SPRAYING
    JOSHI, SV
    SIVAKUMAR, R
    [J]. SURFACE & COATINGS TECHNOLOGY, 1991, 50 (01) : 67 - 74
  • [7] MAZARS P, 1986, P 11 INT THERM SPRAY, P111
  • [8] RAMMATH V, 1989, MAT SCI TECHNOL, V5, P382
  • [9] RAO KV, 1986, P 11 INT THERM SPRAY, P873
  • [10] TUNGSTEN CARBIDE PHASE-TRANSFORMATION DURING THE PLASMA SPRAY PROCESS
    TU, D
    CHANG, S
    CHAO, C
    LIN, C
    [J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1985, 3 (06): : 2479 - 2482