Control of conifer defoliators with neem-based systemic bioinsecticides using a novel injection device

A systemic tree injection tube was designed to introduce them required volumes of neem-based bioinsecticides into conifer trees. The device consists of plastic tubing attached with hose clamps to a maple sap spile at one end and a tuber less automobile tire valve at the other end. A hole is drilled in the tree, the spile is hammered into the hole, the device is filled with the systemic insecticide, and the system is pressurized by attaching a bicycle pump to the tire valve. The parts are readily available, the device is simple to construct and easy and quick to install on a tree, application volumes are adjustable, and the device is reusable. This device has been used successfully to inject 188 trees representing four conifer species in either spring or fall, primarily with neem formulations but also with dimethoate, imidacloprid, and acephate. In most cases, all of the material was injected into the trees without leakage, although neem formulations were characteristically slow to enter the trees and certain neem formulations were not injected completely at volumes above 15 mL per injection tube. Dosages of 0.2 g azadirachtin / cm of diameter at breast height (dbh) or less provided control of pine false webworm, spruce budworm, cedar leafminers, gypsy moth, and introduced pine sawfly, on red pined white spruce, eastern white cedar, white pine, and white pine, respectively. Dosages as low as 0.005 g active ingredient / cm of dbh applied with injection tubes in either one or two holes per tree resulted in a 95% reduction in defoliation of mature (mean dbh +/- SD = 23.4 +/- 3.3 cm) red pine caused by pine false webworm.