'High throughput' solid-phase extraction technology and turbo ionspray LC-MS-MS applied to the determination of haloperidol in human plasma

A quantitative method for the analysis of haloperidol in human plasma is described. Sample clean-up was performed by means of solid-phase extraction using 3M Empore(TM) extraction disk plates in the 96-well format, automated with a Canberra Packard pipetting robot. Separation was performed by reversed phase high performance liquid chromatography with turbo ionspray tandem mass spectrometric detection by monitoring the decay of protonated haloperidol of m/z 376 to its fragment at m/z 165, versus the decay of protonated haloperidol-D4 at m/z 380 to its fragment at m/z 169. The validated concentration range was from 0.100 to 50.0 ng ml(-1), with an inaccuracy and overall imprecision below 10% at all concentration levels. Validation results on linearity, specificity, precision, accuracy and stability are shown and are found to be adequate. The average sample preparation time for a batch of 96 samples is approximately 50 min. The chromatographic run time is 3 min. A sample throughput of at least 240 samples per day can be achieved. (C) 1999 Elsevier Science B.V. All rights reserved.