Evaluation of the fire endurance of mechanically graded timber in bending

This study examined the performance of mechanically graded timber in bending when exposed to fire at various load ratios. The test specimens were 150 pieces, each with the dimensions of 60 x 120 x 3500mm. The modulus of elasticity (MOE) of 150 specimens was measured, and 60 among them were selected to formulate the prediction equation for MOE and modulus of rupture (MOR), which was used to predict the remaining 90 specimens. These were tested under fire exposure in bending using three-point loading at 11.1%, 16.7%, 33.3%, 66.7%, and 83.3% of the ultimate load. Using mechanically graded timber, which means acknowledging the actual strength of the bending member, permits fairly precise application to the targeted design load. This research confirmed that mechanically graded timber under fire exposure has the following tendencies: under the same load ratio, time to failure is independent of strength class, and, at any load ratio, the critical strength is dependent on the timber strength class. The obtained design bending strength under fire exposure using the reduced cross section method and the reduced strength method conformed to those calculated based on Eurocode 5. Following those findings, mechanically graded timber can be applied to obtain the design bending strength when taking into account the fire attack.