Circuit simulation of the behavior of exploding wires for nano-powder production

The electrical behavior of exploding wires was obtained by numerically solving the nonlinear differential equation describing the discharge circuit. For metal wires of high conductivity and low sublimation heat, such as copper, aluminum, gold, and silver, the circuit simulation can be well performed based on the resistivity model developed by Tucker in which the resisitivity is expressed by the explicit functions of specific action, i.e., rho = f(g). For metals such as titanium and zinc with anomalously changing resistivity, i.e., decreasing rather than increasing with the liquid heating, the circuit simulation of the exploding wires call be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. Using the circuit simulation, the rate of the energy deposition in the exploding wires before the explosion can he obtained, which is helpful to choose the right experimental conditions for possible overheating that is desirable for getting smaller nano-powders produced by exploding wires.