Investigation of single SOEC with BSCF anode and SDC barrier layer

被引:54
作者
Zhang, Wenqiang [1 ]
Yu, Bo [1 ]
Xu, Jingming [1 ]
机构
[1] Tsinghua Univ, Inst Nucl & New Energy Technol, Beijing 100084, Peoples R China
关键词
Ba0.5Sr0.5Co0.8Fe0.2O3-delta; Sm0.2Ce0.8O1.9; Solid oxide electrolysis cells; High temperature steam electrolysis; Oxygen electrode; OXIDE ELECTROLYSIS CELLS; TEMPERATURE STEAM ELECTROLYSIS; HYDROGEN-PRODUCTION; FUEL-CELLS; PERFORMANCE; CATHODE; BA0.5SR0.5CO0.8FE0.2O3-DELTA; EFFICIENCY;
D O I
10.1016/j.ijhydene.2011.04.049
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this paper, Sm0.2Ce0.8O1.9 (SDC) is used as a barrier interlayer between Ba0.5Sr0.5Co0.8-Fe0.2O3-delta (BSCF) anode and 8YSZ electrolyte to avoid solid state interaction of solid oxide electrolysis cells (SOEC) for high temperature application. The crystal structure and surface morphologies of BSCF and SDC powders were characterized, respectively. BSCF-SDC/YSZ/SDC-BSCF symmetric cells and BSCF-SDC/YSZ/Ni-YSZ single button cells were prepared and the related electrochemical performances were tested at 850 degrees C. The results showed that ASR data of BSCF-SDC/YSZ is 0.42 Omega cm(2) at 850 C. The hydrogen production rate of the single SOEC using BSCF/SDC anode can be up to 177.4 mL cm(-2) h(-1), also the cell exhibits excellent stability, which indicates that it could be a potential candidate for the future application of SOEC technology. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:837 / 842
页数:6
相关论文
共 19 条
[1]   High temperature water electrolysis in solid oxide cells [J].
Brisse, Annabelle ;
Schefold, Josef ;
Zahid, Mohsine .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (20) :5375-5382
[2]  
Doenitz W, 1985, INT J HYDROGEN ENERG, V10, P291
[3]   Perovskite cathodes for solid oxide fuel cells based on ceria electrolytes [J].
Godickemeier, M ;
Sasaki, K ;
Gauckler, LJ ;
Riess, I .
SOLID STATE IONICS, 1996, 86-8 :691-701
[4]   Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology [J].
Herring, J. Stephen ;
O'Brien, James E. ;
Stoots, Carl M. ;
Hawkes, G. L. ;
Hartvigsen, Joseph J. ;
Shahnam, Mehrdad .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2007, 32 (04) :440-450
[5]  
HERRING JS, 2003, 2 INF EXCH M NUCL PR
[6]   Hydrogen and synthetic fuel production using pressurized solid oxide electrolysis cells [J].
Jensen, Soren Hojgaard ;
Sun, Xiufu ;
Ebbesen, Sune Dalgaard ;
Knibbe, Ruth ;
Mogensen, Mogens .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (18) :9544-9549
[7]   Preparation of NiO-YSZ composite powder by a combustion method and its application for cathode of SOEC [J].
Liang, Mingde ;
Yu, Bo ;
Wen, Mingfen ;
Chen, Jing ;
Xu, Jingming ;
Zhai, Yuchun .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (07) :2852-2857
[8]   Thermodynamic analysis of the efficiency of high-temperature steam electrolysis system for hydrogen production [J].
Liu Mingyi ;
Yu Bo ;
Xu Jingming ;
Chen Jing .
JOURNAL OF POWER SOURCES, 2008, 177 (02) :493-499
[9]   Influence of pore formers on physical properties and microstructures of supporting cathodes of solid oxide electrolysis cells [J].
Liu Mingyi ;
Yu Bo ;
Xu Jingming ;
Chen Jing .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (07) :2670-2674
[10]   Performance Measurements of Solid-Oxide Electrolysis Cells for Hydrogen Production [J].
O'Brien, J. E. ;
Stoots, C. M. ;
Herring, J. S. ;
Lessing, P. A. ;
Hartvigsen, J. J. ;
Elangovan, S. .
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2005, 2 (03) :156-163