Modification of electrophoretically deposited nano-hydroxyapatite coatings by wire brushing on Ti-6Al-4V substrates

被引:43
作者
Farnoush, Hamidreza [1 ]
Mohandesi, Jamshid Aghazadeh [1 ]
Fatmehsari, Davoud Haghshenas [1 ]
Moztarzadeh, Fathollah [2 ]
机构
[1] Amirkabir Univ Technol, Dept Min & Met Engn, Tehran, Iran
[2] Amirkabir Univ Technol, Dept Biomed Engn, Tehran, Iran
关键词
Powders: chemical preparation; Surfaces; Strength; Apatite; Biomedical applications; Electrophoretic deposition; BEHAVIOR; ALLOYS;
D O I
10.1016/j.ceramint.2012.02.079
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
081705 [工业催化]; 082905 [生物质能源与材料];
摘要
In the present study, after successful synthesis of nano-HA powders by chemical precipitation method, wire-brushing (WB) treatment was effectively employed on Ti-6Al-4V substrates for the modification of electrophoretically deposited nano-hydroxyapatite coatings. The precipitated nano-HA particles were characterized by XRD, FT-IR, and DLS analyses. The morphology and particle size of synthesized nano-HA particles was observed by FE-SEM. The Ti-6Al-4V plates were initially wire brushed at different times and rotational speeds. Microhardness profile and AFM analysis of substrates were then studied. It was found that WB treatment at 16,000 rpm for 60 s leads to a maximum enhancement in the hardness and roughness of surface. Then, the electrophoretic deposition of nano-HA particles was carried out at constant voltage of 30 V and after 60 s. The results of adhesion test and potentiodynamic polarization measurements showed that WB treatment on Ti-6Al-4V substrates could efficiently increase the bonding strength between coating and substrate as well as corrosion resistance. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:4885 / 4893
页数:9
相关论文
共 40 条
[1]
Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition [J].
Albayrak, Onder ;
El-Atwani, Osman ;
Altintas, Sabri .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (11) :2482-2487
[2]
Electropolishing of AISI-304 stainless steel for protection against SRB biofilm [J].
Awad, A. M. ;
Ghazy, E. A. ;
El-Enin, S. A. Abo ;
Mahmoud, M. G. .
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (14) :3165-3172
[3]
Electrophoretic deposition of biomaterials [J].
Boccaccini, A. R. ;
Keim, S. ;
Ma, R. ;
Li, Y. ;
Zhitomirsky, I. .
JOURNAL OF THE ROYAL SOCIETY INTERFACE, 2010, 7 :S581-S613
[4]
Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques [J].
Carreon, H. ;
Barriuso, S. ;
Barrera, G. ;
Gonzalez-Carrasco, J. L. ;
Caballero, F. G. .
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (11-12) :2941-2946
[5]
Cullity B.D., 1977, ELEMENTS XRAY DIFFRA, V2nd
[6]
Deng JX, 2000, CERAM INT, V26, P825
[7]
Evaluation of hydroxyapatite and β-tri calcium phosphate microplasma spray coated pin intra-medullary for bone repair in a rabbit model [J].
Dey, Arjun ;
Nandi, Samit Kumar ;
Kundu, Biswanath ;
Kumar, Chandrasekhar ;
Mukherjee, Prasenjit ;
Roy, Subhasis ;
Mukhopadhyay, Anoop Kumar ;
Sinha, Mithlesh Kumar ;
Basu, Debabrata .
CERAMICS INTERNATIONAL, 2011, 37 (04) :1377-1391
[8]
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review [J].
Geetha, M. ;
Singh, A. K. ;
Asokamani, R. ;
Gogia, A. K. .
PROGRESS IN MATERIALS SCIENCE, 2009, 54 (03) :397-425
[9]
Influence of stacking-fault energy on high temperature creep of alpha titanium alloys [J].
Guo, Z ;
Miodownik, AP ;
Saunders, N ;
Schillé, JP .
SCRIPTA MATERIALIA, 2006, 54 (12) :2175-2178
[10]
Preparation and in vitro characterization of aerosol-deposited hydroxyapatite coatings with different surface roughnesses [J].
Hahn, Byung-Dong ;
Park, Dong-Soo ;
Choi, Jong-Jin ;
Ryu, Jungho ;
Yoon, Woon-Ha ;
Choi, Joon-Hwan ;
Kim, Jong-Woo ;
Cho, Young-Lae ;
Park, Chan ;
Kim, Hyoun-Ee ;
Kim, Seong-Gon .
APPLIED SURFACE SCIENCE, 2011, 257 (17) :7792-7799