Estimation of Urban Green Volume Based on Single-Pulse LiDAR Data

被引:52
作者
Hecht, Robert [1 ]
Meinel, Gotthard [1 ]
Buchroithner, Manfred F. [2 ]
机构
[1] Leibniz Inst Ecol & Reg Dev, D-01217 Dresden, Germany
[2] Tech Univ Dresden, Inst Cartog, D-01062 Dresden, Germany
来源
IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING | 2008年 / 46卷 / 11期
关键词
Density measurement; estimation; fuzzy control; Light Detection and Ranging (LiDAR); modeling; urban areas; vegetation mapping; volume measurement;
D O I
10.1109/TGRS.2008.2001771
中图分类号
P3 [地球物理学]; P59 [地球化学];
学科分类号
0708 ; 070902 ;
摘要
Estimating urban green volume is getting more and more important within the frame of an ecologically orientated city planning and environmentally sustainable development. The first and the last pulse of airborne Light Detection and Ranging (LiDAR) data provide the basis for the estimation of green volume, but these optimal data are not always available, particularly for urban areas. That is why this paper deals with the question whether LiDAR data (last pulse only) that have not been taken during the vegetation period allow a sufficient estimation of the green volume: This paper sets up on previous results where LiDAR data have been compared to photogrammetrically determined vegetation height measurements. The subtraction of the laser-based Digital Terrain Model and Digital Surface Model in vegetated areas leads to a vast underestimation of green volume of up to 85%, which is mainly due to the standing deciduous trees with an underestimation of 90%. Starting from the existence of different laser response characteristics of various vegetation types, the relative point density and the normalized height of classified nonground points were analyzed in depth. The results show a good separation of different vegetation types. Furthermore, a pragmatic approach of reconstruction of the underestimated vegetation (mainly deciduous trees) is carried out by generating cylinders for the classified nonground points to compensate the volume loss. The point density of nonground points and the normalized height of the laser responses were used to regulate the adaptive cylinder construction based on fuzzy logic techniques. Using reference data, the accuracy could be estimated. In spite of the suboptimal LiDAR data, this paper leads to a sufficiently exact and efficient estimation of green volume compared to the costly conventional methods like field investigations. The method makes a contribution in the field of data improvement and is applicable to similar LiDAR data of other areas.
引用
收藏
页码:3832 / 3840
页数:9
相关论文
共 15 条
[1]  
BANZHAF E, 2007, P 4 IEEE GRSS ISPRS, P1
[2]  
Charaniya Amin P, 2004, Charaka samhita of Agnivesha, P30, DOI 10.1109/CVPR.2004.446
[3]  
DUCIC V., 2006, WORKSH 3D REM SENS F, P211
[4]  
GROSSMANN M, 1984, SCHRIFTEN BEHORDE BE
[5]  
HECHT R, 2006, P CHALL SOL 1 WORKSH
[6]  
HYYPPA J, 2004, LASER SCANNERS FORES, P82
[7]   Determination of terrain models in wooded areas with airborne laser scanner data [J].
Kraus, K ;
Pfeifer, N .
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING, 1998, 53 (04) :193-203
[8]  
Lang S, 2007, NATO SCI PEACE SECUR, P93, DOI 10.1007/978-1-4020-6594-1_6
[9]  
MAYER A, 1993, FUZZY LOGIC, P9
[10]  
MEINEL G, 2004, LASER SCANNERS FORES, P334