Sensor integration for a hydraulic clamping system

被引：12

作者：

Denkena, Berend ^{[1
]}

Dahlmann, Dominik ^{[1
]}

Kiesner, Johann ^{[1
]}

机构：

[1] Univ Hannover, Inst Prod Engn & Machine Tools IFW, D-30823 Garbsen, Germany

来源：

2ND INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING | 2014年 / 15卷

关键词：

strain gauges; sensor integration; hydraulic clamping-elements; hydraulic swing clamp; clamping system; condition monitoring; FIXTURE;

D O I：

10.1016/j.protcy.2014.09.006

中图分类号：

TP18 [人工智能理论];

学科分类号：

081104 ; 0812 ; 0835 ; 1405 ;

摘要：

Failures in workpiece positioning influence the machining conditions and outcome of machine tools directly. Hence, the monitoring by a sensor integrated clamping system to avoid rejects is subject of the presented work. The overall aim is to integrate sensory capabilities in a hydraulic clamping system typically used in series production within a joint research project. This paper gives a general survey of the targeted application and focuses on the sensor integration. It shows the qualification of strain gauges for indirect measurement of oil pressure in the hydraulic clamping element and the potential use of the same strain gauges to measure further monitoring objectives. (C) 2014 The Authors. Published by Elsevier Ltd.

引用

页码：465 / 473

页数：9

共 13 条

[1] A review and analysis of current computer-aided fixture design approaches [J].

Boyle, Iain ;

Rong, Yiming ;

Brown, David C. .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2011, 27 (01) :1-12

[2] Design and analysis of a prototypical sensory Z-slide for machine tools [J].

Denkena B. ;

Litwinski K.M. ;

Brouwer D. ;

Boujnah H. .

Production Engineering, 2013, 7 (1) :9-14

[3]

Denkena B, 2012, P SYSINT2012 C HAN G

[4]

Kang X, 2009, RECENT PATENTS MECH, V2, P8

[5]

Litwinski K. M., 2011, THESIS LEIBNIZ U HAN

[6] Process monitoring with sensory machine tool components [J].

Moehring, H. -C. ;

Litwinski, K. M. ;

Guemmer, O. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) :383-386

[7] An intelligent fixture with a dynamic clamping scheme [J].

Nee, AYC ;

Kumar, AS ;

Tao, ZJ .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2000, 214 (03) :183-196

[8] Automated fixture configuration for rapid manufacturing planning [J].

Nelaturi, Saigopal ;

Rangarajan, Arvind ;

Fritz, Christian ;

Kurtoglu, Tolga .

COMPUTER-AIDED DESIGN, 2014, 46 :160-169

[9]

NEUBER H, 2001, KERBSPANNUNGSLEHRE

[10] Mechatronic systems for machine tools [J].

Neugebauer, R. ;

Denkena, B. ;

Wegener, K. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (02) :657-686

← 1 2 →