Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element

Bulk metallic glasses (BMGs) have been classified according to the atomic size difference. heat of mixing (Delta H-mix) and period of the constituent elements in the periodic table. The BMGs discovered to date are classified into seven groups on the basis of a previous result by Inoue. The seven groups are as follows: (G-I) ETM/Ln-LTM/BM-Al/Ga, (G-II) ETM/Ln-LTM/BM-Metalloid (G-III) Al/Ga-LTM/BM-Metalloid, (G-IV) IIA-ETM/Ln-LTM/BM, (G-V) LTM/BM-Metalloid, (G-VI) ETM/Ln-LTM/BM and (G-VII) IIA-LTM/BM. where ETM. Ln, LTM, BM and IIA refer to early transition, lantlianide, late transition, group IIIB-IVB and group IIA-group metals, respectively. The main alloying element of ternary G-I, G-V and G-VII, ternary G-II and G-IV, and tertiary G-VI BMGs is the largest, intermediate and smallest atomic radius compared to the other alloying elements, respectively. The main alloying element of tertiary BMGs belonging to G-I. G-V. G-VI and G-VII is an element in the atomic pair with the largest and negative value of Delta H-mix (<(Delta H)under bar >(mix)(LN)). while the main element of ternary BMGs belonging to G-II and G-IV is independent of the atomic pair with <(Delta H)under bar >(mix)(LN). The characteristics of the main element derived for the ternary BMGs are directly applicable to multicomponent BMGs belonging to G-I. G-II, G-IV (Mg-based BMGs), G-V and G-VII. The main element can be the larger-sized element in the atomic pair with <(Delta H)under bar >(mix)(LN) or in the same group as the other elements for multicomponent BMGs belonging to G-III. G-IV (Be-containing Zr-based BMG) and G-VI. The main element of BMGs belonging to G-VI tends to change from the element with the smallest atomic radius in a ternary system to an element with a relatively large atomic size in a in multicomponent system. The change is due to an increase in glass-forming ability through multicomponent alloying of BMGs belonging to G-VI. The results of the classification of BMGs obtained in the present study are important for further development of BMGs, with the results providing a road map for the development of new BMG compositions.