An investigation of microstructure evolution of RAP processed ZK60 magnesium alloy

被引:44
作者
Luo, Shoujing [1 ]
Chen, Qiang [1 ]
Zhao, Zude [2 ]
机构
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
[2] SW Tech & Engn Inst, Chongqing 400049, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 501卷 / 1-2期
关键词
Magnesium alloys; Semi-solid state; RAP; Microstructure; DEFORMATION CHARACTERISTICS; AZ91D ALLOY; BEHAVIOR; SLURRY; VOLUME;
D O I
10.1016/j.msea.2008.09.059
中图分类号
TB3 [工程材料学];
学科分类号
082905 [生物质能源与材料];
摘要
The effect of compression ratio on the microstructure evolution of semi-solid ZK60 magnesium alloy produced by the recrystallisation and partial melting (RAP) process was investigated. The microstructure evolution within the semi-solid zone of a ZK60 alloy through a direct isothermal holding process from as-received and as-deformed conditions was also investigated. The results show that as-received alloys reheated to the semi-solid state had solid particles predominantly elongated along original extrusion direction. For as-deformed alloys, the compression deformation gradually refined the recrystallised at Mg grains by increasing their nucleation to growth ratio. During isothermal holding, intragranular liquid droplets were present in a large number of solid particles, reducing in number and increasing in average size with increasing holding time. The coarsening behavior of solid particles in the semi-solid state obeyed an Ostwald ripening mechanism. The coarsening rate constant obtained was 556 mu m(3)s(-1) at 590 degrees C. (c) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:146 / 152
页数:7
相关论文
共 23 条
[1]
INHIBITED COARSENING OF SOLID-LIQUID MICROSTRUCTURES IN SPRAY CASTING AT HIGH-VOLUME FRACTIONS OF SOLID [J].
ANNAVARAPU, S ;
DOHERTY, RD .
ACTA METALLURGICA ET MATERIALIA, 1995, 43 (08) :3207-3230
[2]
Recrystallisation in the semi-solid state in 7075 aluminium alloy [J].
Atkinson, H. V. ;
Burke, K. ;
Vaneetveld, G. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2) :266-276
[3]
Multistep induction heating regimes for thixoforming 7075 aluminium alloy [J].
Chayong, S ;
Atkinson, HV ;
Kapranos, P .
MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (04) :490-496
[4]
Microstructural evolution of previously deformed ZA27 alloy during partial remelting [J].
Chen, TJ ;
Hao, Y ;
Sun, J .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2) :73-81
[5]
An investigation of compressive deformation behaviour for AZ91 Mg alloy containing a small volume of liquid [J].
Chino, Y ;
Kobata, M ;
Iwasaki, H ;
Mabuchi, M .
ACTA MATERIALIA, 2003, 51 (11) :3309-3318
[6]
Rheological behaviour and deformation characteristics of a commercial and a laboratory-cast Al-4%Cu alloy in the semi-solid state [J].
De Freitas, ER ;
Ferrante, M .
ACTA MATERIALIA, 2001, 49 (18) :3839-3847
[7]
MICROSTRUCTURE OF STIR-CAST METALS [J].
DOHERTY, RD ;
LEE, HI ;
FEEST, EA .
MATERIALS SCIENCE AND ENGINEERING, 1984, 65 (01) :181-189
[8]
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process [J].
Fan, Z ;
Liu, G .
ACTA MATERIALIA, 2005, 53 (16) :4345-4357
[9]
FLEMINGS MC, 1974, SOLIDIFICATION PROCE, P160
[10]
Isothermal coarsening of fine and spherical particles in semisolid slurry of Mg-9Al-1Zn alloy under low shear [J].
Ji, S. ;
Roberts, K. ;
Fan, Z. .
SCRIPTA MATERIALIA, 2006, 55 (11) :971-974