Development of electro-pneumatic fast switching valve and investigation of its characteristics

被引：115

作者：

Topcu, Elif Erzan ^{[1
]}

Yueksel, Ibrahim ^{[1
]}

Kamis, Zeliha ^{[1
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Mech Engn, TR-16059 Bursa, Turkey

来源：

MECHATRONICS | 2006年 / 16卷 / 06期

关键词：

electro-pneumatic; fast switching solenoid valve; PWM; mechatronic;

D O I：

10.1016/j.mechatronics.2006.01.005

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The paper describes the development of an electrically operated pneumatic fast-switching valve for pneumatic position control systems. The valve was designed and fabricated as an on-off valve with 2/2-way function and its characteristics were investigated. The detailed theoretical analysis and preliminary tests were carried out on the manufactured valve and showed that the switching time of the single stage valve is about 4.5 ms and provides a 460 l/min of flow rate at standard air conditions. Production and assembling of the valve is rather simple and does not need a manufacturing operation with tight tolerance and therefore, it is envisaged as a low cost valve. The four of 2/2-way function valves are applicable for the realization of pneumatic actuators driving with a well-known established technique of the pulse width modulation (PWM). (C) 2006 Elsevier Ltd. All rights reserved.

引用

页码：365 / 378

页数：14

共 26 条

[1]

Andersen BW, 1968, ANAL DESIGN PNEUMATI

[2]

Belforte G, 2004, MECHATRONICS, V14, P1105, DOI 10.1016/j.mechantronics.2004.06.006

[3]

Gentile A, 2002, IEEE ICIT' 02: 2002 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS I AND II, PROCEEDINGS, P555, DOI 10.1109/ICIT.2002.1189959

[4]

GOLDSTEIN SR, 1968, J BASIC ENG C, P143

[5] Theoretical and experimental investigation of a pulse-width modulated digital hydraulic position control system [J].

Keles, O ;

Ercan, Y .

CONTROL ENGINEERING PRACTICE, 2002, 10 (06) :645-654

[6]

LAU KS, 1987, THESIS U SURREY SURR

[7]

Leufgen M., 1991, Oelhydraulik und Pneumatik, V35, P127

[8]

McCloy D., 1980, CONTROL OF FLUID POWER Analysis and Design, Ed, V2nd (revised) ed.

[9]

Morito Y. S., 1987, P INT S FLUID POW CO, P3

[10]

MORTAUGH SA, 1959, T ASME, V81, P263

← 1 2 3 →