Synthesis and properties of imidazole-grafted hybrid inorganic-organic polymer membranes

被引:40
作者
Li, SW
Zhou, Z
Liu, ML [1 ]
Li, W
Ukai, J
Hase, K
Nakanishi, M
机构
[1] Georgia Inst Technol, Sch Mat Sci & Engn, Ctr Innovat Fuel Cell & Battery Technol, Atlanta, GA 30332 USA
[2] Toyota Tech Ctr USA Inc, Dept Mat Engn, Ann Arbor, MI 48105 USA
[3] Toyota Motor Co Ltd, Vehicle Engn Grp, Mat Engn Div 3, Shizuoka 4101193, Japan
关键词
proton exchange membranes (PEMs); imidazole; proton conductivity; polymers; phosphorus acid;
D O I
10.1016/j.electacta.2005.07.010
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Imidazole rings were grafted on alkoxysilane with a simple nucleophilic substitute reaction to form hybrid inorganic-organic polymers with imidazole rings. Proton exchange membranes (PEM) based on these hybrid inorganic-organic polymers and H3PO4 exhibit high proton conductivity and high thermal stability in an atmosphere of low relative humidity. The grafted imidazole rings improved the proton conductivity of the membranes in the high temperature range. It is found that the proton conductivities increase with H3PO4 content and temperature, reaching 3.2x10(-3) S/cm at 110 degrees C in a dry atmosphere for a membrane with 1 mole of imidazole ring and 7 moles of H3PO4. The proton conductivity increases with relative humidity (RH) as well, reaching 4.3x10(-2) S/cm at 110 degrees C when the RH is increased to about 20%. Thermogravimetric analysis (TGA) indicates that these membranes are thermally stable up to 250 degrees C in dry air, implying that they have a good potential to be used as the membranes for high-temperature PEM fuel cells. (C) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1351 / 1358
页数:8
相关论文
共 37 条
[1]  
AGLIANO GRA, 1989, J ORG CHEM, V54, P5247
[2]   Investigation of a direct methanol fuel cell based on a composite Nafion®-silica electrolyte for high temperature operation [J].
Antonucci, PL ;
Aricò, AS ;
Cretì, P ;
Ramunni, E ;
Antonucci, V .
SOLID STATE IONICS, 1999, 125 (1-4) :431-437
[3]  
Appleby A.J., 1993, FUEL CELL HDB, V2nd
[4]   Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells [J].
Bae, JM ;
Honma, I ;
Murata, M ;
Yamamoto, T ;
Rikukawa, M ;
Ogata, N .
SOLID STATE IONICS, 2002, 147 (1-2) :189-194
[5]   Proton conducting copolymers on the basis of vinylphosphonic acid and 4-vinylimidazole [J].
Bozkurt, A ;
Meyer, WH ;
Gutmann, J ;
Wegner, G .
SOLID STATE IONICS, 2003, 164 (3-4) :169-176
[6]   Proton conducting blends of poly(4-vinylimidazole) with phosphoric acid [J].
Bozkurt, A ;
Meyer, WH .
SOLID STATE IONICS, 2001, 138 (3-4) :259-265
[7]   Proton-conducting membrane composed of sulfonated polystyrene microspheres, poly(vinylpyrrolidone) and poly(vinylidene fluoride) [J].
Chen, NP ;
Hong, L .
SOLID STATE IONICS, 2002, 146 (3-4) :377-385
[8]   Characterization of perdeuterated H3PO4-doped nonaqueous gel electrolytes using 31P nuclear magnetic resonance spectroscopy [J].
Chung, SH ;
Wang, Y ;
Greenbaum, SG ;
Bzducha, W ;
Zukowska, G ;
Wieczorek, W .
ELECTROCHIMICA ACTA, 2001, 46 (10-11) :1651-1655
[9]  
DEAN JA, 1987, HDB ORG CHEM
[10]   Proton conducting sulfon/sulfonamide functionalized materials based on inorganic-organic matrices [J].
Depre, L ;
Ingram, M ;
Poinsignon, C ;
Popall, M .
ELECTROCHIMICA ACTA, 2000, 45 (8-9) :1377-1383