Energy harvesting from a standing wave thermoacoustic-piezoelectric resonator

In this paper, a one-dimensional thermoacoustic-piezoelectric (TAP) resonator is developed to convert thermal energy, such as solar or waste heat energy, directly into electrical energy. The thermal energy is utilized to generate a steep temperature gradient along a porous stack which is optimally sized and placed near one end of the resonator. At a specific threshold of the temperature gradient, self-sustained acoustic waves are generated inside the resonator. The resulting pressure fluctuations excite a piezoelectric diaphragm, placed at the opposite end of the resonator, which converts the acoustic energy directly into electrical energy without the need for any moving components. The theoretical performance characteristics of this class of thermoacoustic-piezoelectric resonators are predicted using the Design Environment for Low-amplitude Thermoacoustic Energy Conversion Software. These characteristics are validated experimentally on a small prototype of the system. Particular emphasis is placed on monitoring the temperature field using infrared camera, the flow field using particle image velocimetry, the acoustic field using an array of microphones, and the energy conversion efficiency. Comparisons between the theoretical predictions and the experimental results are also presented. The developed theoretical and experimental techniques can be invaluable tools in the design of TAP resonators for harvesting thermal energy in areas far from the power grid such as nomadic communities and desert regions for light, agricultural, air conditioning, and communication applications. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4712630]