Fabrication and Performance of Cone-Shaped Segmented-In-Series Solid Oxide Fuel Cells

被引：26

作者：

Zhang, Yaohui ^{[1
]}

Liu, Jiang ^{[1
]}

Yin, Juan ^{[1
]}

Yuan, Wensheng ^{[1
]}

Sui, Jing ^{[1
]}

机构：

[1] S China Univ Technol, Coll Chem, Guangzhou 510640, Peoples R China

来源：

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2008年 / 5卷 / 06期

关键词：

D O I：

10.1111/j.1744-7402.2008.02253.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A new design of segmented-in-series solid oxide fuel cells (SOFCs) is presented in this paper. The small cone-shaped anode tubes were fabricated by slip casting and the yttria-stabilized zirconia (YSZ) electrolyte membranes were deposited onto the anode tubes by dip coating. After sintering at 1400 degrees C for 4 h, a dense and crack-free YSZ membrane with a thickness of 20 mu m was successfully obtained. The single cell, using moist hydrogen as a fuel and ambient air as an oxidant, provides maximum power densities of 1.15, 0.8, 0.47, 0.26, 0.14, and 0.07 W/cm(2) at 850 degrees C, 800 degrees C, 750 degrees C, 700 degrees C, 650 degrees C, and 600 degrees C, respectively.

引用

页码：568 / 573

页数：6

共 21 条

[1] On the green density, sintering behavior and electrical property of tape cast Ce0.9Gd0.01O1.95 electrolyte films [J].

Cheng, JG ;

Zha, SW ;

Fang, XH ;

Liu, XQ ;

Meng, GY .

MATERIALS RESEARCH BULLETIN, 2002, 37 (15) :2437-2446

[2] Fabrication, microstructure and properties of a YSZ electrolyte for SOFCs [J].

Han, Minfang ;

Tang, Xiuling ;

Yin, Huiyan ;

Peng, Suping .

JOURNAL OF POWER SOURCES, 2007, 165 (02) :757-763

[3] Materials and technologies for SOFC-components [J].

Ivers-Tiffée, E ;

Weber, A ;

Herbstritt, D .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (10-11) :1805-1811

[4] Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells [J].

Kim, SD ;

Hyun, SH ;

Moon, J ;

Kim, JH ;

Song, RH .

JOURNAL OF POWER SOURCES, 2005, 139 (1-2) :67-72

[5] Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method [J].

Kim, SG ;

Yoon, SP ;

Nam, SW ;

Hyun, SH ;

Hong, SA .

JOURNAL OF POWER SOURCES, 2002, 110 (01) :222-228

[6] Research of processing techniques used in fabrication of solid oxide fuel cells and study of their selected properties [J].

Liu, J ;

Lu, Z ;

Liu, W ;

Pei, L ;

Zhao, X ;

Jia, L ;

Song, YB ;

Liu, XM ;

He, LY ;

Su, WH .

SCIENCE IN CHINA SERIES A-MATHEMATICS, 1998, 41 (05) :521-526

[7] Nanostructured and functionally graded cathodes for intermediate temperature solid oxide fuel cells [J].

Liu, Y ;

Compson, C ;

Liu, ML .

JOURNAL OF POWER SOURCES, 2004, 138 (1-2) :194-198

[8] CERAMIC FUEL-CELLS [J].

MINH, NQ .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (03) :563-588

[9] Fabrication and characterization of tubular solid oxide fuel cells [J].

Sammes, N. M. ;

Du, Yanhai .

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2007, 4 (02) :89-102

[10] Design and fabrication of a 100 W anode supported micro-tubular SOFC stack [J].

Sammes, NM ;

Du, Y ;

Bove, R .

JOURNAL OF POWER SOURCES, 2005, 145 (02) :428-434

← 1 2 3 →