Effect of polyacenic semiconductors on the performance of Olivine LiFePO4

被引：22

作者：

Yang, G. L. ^{[1
]}

Jalbout, A. F. ^{[2
]}

Xu, Y. ^{[1
]}

Yu, H. Y. ^{[1
]}

He, X. G. ^{[1
]}

Xie, H. M. ^{[1
]}

Wang, R. S. ^{[1
]}

机构：

[1] NE Normal Univ, Dept Chem, Inst Funct Mat, Changchun 130024, Jilin, Peoples R China

[2] Univ Nacl Autonoma Mexico, Inst Quim, Mexico City 04510, DF, Mexico

来源：

ELECTROCHEMICAL AND SOLID STATE LETTERS | 2008年 / 11卷 / 08期

关键词：

D O I：

10.1149/1.2929067

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

An effective way to improve the conductivity of LiFePO4 is by the introduction of conductive carbon. The carbon structure is an important component needed to obtain optimal electrochemical performance. In the present work, an Olivine-type LiFePO4 powder has been synthesized from amorphous Fe-3(PO4)(2) and Li3PO4 center dot 1/2H(2)O by solid-state methods. For purposes of comparison, the phenol-formaldehyde resin was added as a carbon precursor to convert the polyacenic semiconductor (PAS). This compound is a form of amorphous carbon with decent carbon structures formed after low heat treatments. The electric conductivity of the synthesized LiFePO4/PAS composite has been raised by seven orders of magnitude. The resultant electrochemical performance was tested and lower polarization, higher rate capacity, and better cycling ability were obtained.

引用

页码：A125 / A128

页数：4

共 17 条

[1] Optimization of carbon coatings on LiFePO4 [J].

Doeff, Marca M. ;

Wilcox, James D. ;

Kostecki, Robert ;

Lau, Grace .

JOURNAL OF POWER SOURCES, 2006, 163 (01) :180-184

[2] Effect of surface carbon structure on the electrochemical performance of LiFePO4 [J].

Doeff, MM ;

Hu, YQ ;

McLarnon, F ;

Kostecki, R .

ELECTROCHEMICAL AND SOLID STATE LETTERS, 2003, 6 (10) :A207-A209

[3] Comparison between different LiFePO4 synthesis routes and their influence on its physico-chemical properties [J].

Franger, S ;

Le Cras, F ;

Bourbon, C ;

Rouault, H .

JOURNAL OF POWER SOURCES, 2003, 119 :252-257

[4] Synthesis and characterization of nano-sized LiFePO4 cathode materials prepared by a citric acid-based sol-gel route [J].

Hsu, KF ;

Tsay, SY ;

Hwang, BJ .

JOURNAL OF MATERIALS CHEMISTRY, 2004, 14 (17) :2690-2695

[5] Surface studies of carbon films from pyrolyzed photoresist [J].

Kostecki, R ;

Schnyder, B ;

Alliata, D ;

Song, X ;

Kinoshita, K ;

Kötz, R .

THIN SOLID FILMS, 2001, 396 (1-2) :36-43

[6] Hydrothermal synthesis of high surface LiFePO4 powders as cathode for Li-ion cells [J].

Meligrana, G. ;

Gerbaldi, C. ;

Tuel, A. ;

Bodoardo, S. ;

Penazzi, N. .

JOURNAL OF POWER SOURCES, 2006, 160 (01) :516-522

[7] Emulsion drying synthesis of olivine LiFePO4/C composite and its electrochemical properties as lithium intercalation material [J].

Myung, ST ;

Komaba, S ;

Hirosaki, N ;

Yashiro, H ;

Kumagai, N .

ELECTROCHIMICA ACTA, 2004, 49 (24) :4213-4222

[8] Phospho-olivines as positive-electrode materials for rechargeable lithium batteries [J].

Padhi, AK ;

Nanjundaswamy, KS ;

Goodenough, JB .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (04) :1188-1194

[9] Morphological investigation of sub-micron FePO4 and LiFePO4 particles for rechargeable lithium batteries [J].

Scaccia, S ;

Carewska, M ;

Wisniewski, P ;

Prosini, PP .

MATERIALS RESEARCH BULLETIN, 2003, 38 (07) :1155-1163

[10] Electrochemical properties of carbon-coated LiFePO4 cathode using graphite, carbon black, and acetylene black [J].

Shin, Ho Chul ;

Cho, Won Il ;

Jang, Ho .

ELECTROCHIMICA ACTA, 2006, 52 (04) :1472-1476

← 1 2 →