Measurement of interstitial convective heat transfer and frictional drag for flow across metal foams

Convective heat transfer and friction drag in a duct inserted with aluminum foams have been studied experimentally,. The combined effects of foam porosity (epsilon =0.7, 0.8, and 0.95) and flow Reynolds number (1900less than or equal toReless than or equal to7800) are examined. Frictional drags for flow across the aluminum foam are measured by, pressure taps, while interstitial heat transfer coefficients in the aluminum foam are determined using a transient single-blow technique with a thermal non-equilibrium two-equation model. Solid material temperature distribution is further measured for double check of the heat transfer results. To understand the frictional drag mechanisms, smoke-wire flow visualization is conducted in the aluminum foam ducts. Results show that both the friction factor and the volumetric heat transfer coefficient increase with decreasing the foam porosity at a fixed Reynolds number. In addition, the aluminum foam of epsilon=0.8 has the best thermal performance under the same pumping power constraint among the three aluminum foams investigated. Finally, empirical correlations for pore Nusselt number are developed in terms of pore Reynolds number under various foam porosities.