Comparison and optimization of single-phase liquid cooling devices for the heat dissipation of high-power LED arrays

被引：73

作者：

Ramos-Alvarado, Bladimir ^{[1
]}

Feng, Bo ^{[1
]}

Peterson, G. P. ^{[1
]}

机构：

[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA

来源：

APPLIED THERMAL ENGINEERING | 2013年 / 59卷 / 1-2期

关键词：

High-power LEDs; LED; Minichannels; Microjets; Optimization; Entropy generation minimization; FLOW DISTRIBUTION UNIFORMITY; THERMAL MANAGEMENT; DISTRIBUTORS; BIFURCATION; DESIGN; SYSTEM; FIELD; CFD;

D O I：

10.1016/j.applthermaleng.2013.06.036

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The thermal and hydrodynamic performance of liquid active cooling devices was investigated for possible applications in the thermal management of high-power LED arrays fabricated on InGaN/sapphire chips. A microjet solution and a series of minichannel cold plates were investigated using full 3-D numerical simulations. An optimization based on entropy generation minimization was performed with goal of reducing the frictional pressure losses in the various minichannel geometries evaluated. The effective thermal resistance, pressure drop and pumping power requirements were calculated for all the cold plates investigated. The results of the entropy generation minimization process indicated that the minichannel cold plate had a lower flow resistance than the base design reported in previous investigations. Due to the different length scales presented in this problem, a small-scale model was developed using a simple thermal resistance formulation for the chips, in order to calculate the chip Junction temperature at different operating conditions. Overall, it was found that the minichannel cold plate design is a better thermal management option than microjets for the cooling of high-power LEDs. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：648 / 659

页数：12

共 31 条

[1] Thermal analysis of power LED employing dual interface method and water flow as a cooling system [J].

Anithambigai, P. ;

Dinash, K. ;

Mutharasu, D. ;

Shanmugan, S. ;

Lim, Choon Kim .

THERMOCHIMICA ACTA, 2011, 523 (1-2) :237-244

[2] The constructal law of organization in nature: tree-shaped flows and body size [J].

Bejan, A .

JOURNAL OF EXPERIMENTAL BIOLOGY, 2005, 208 (09) :1677-1686

[3] On the thermal characterization of an RGB LED-based white light module [J].

Cheng, Hsien-Chie ;

Lin, Jia-Yun ;

Chen, Wen-Hwa .

APPLIED THERMAL ENGINEERING, 2012, 38 :105-116

[4] Heat dissipation design and analysis of high power LED array using the finite element method [J].

Cheng, Hui Huang ;

Huang, De-Shau ;

Lin, Ming-Tzer .

MICROELECTRONICS RELIABILITY, 2012, 52 (05) :905-911

[5] Thermal analysis and optimization of multiple LED packaging based on a general analytical solution [J].

Cheng, Ting ;

Luo, Xiaobing ;

Huang, Suyi ;

Liu, Sheng .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (01) :196-201

[6] Thermal effects in packaging high power light emitting diode arrays [J].

Christensen, Adam ;

Graham, Samuel .

APPLIED THERMAL ENGINEERING, 2009, 29 (2-3) :364-371

[7] A liquid metal cooling system for the thermal management of high power LEDs [J].

Deng, Yueguang ;

Liu, Jing .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (07) :788-791

[8] Refrigerating liquid prototype for LED's thermal management [J].

Faranda, Roberto ;

Guzzetti, Stefania ;

Lazaroiu, George Cristian ;

Leva, Sonia .

APPLIED THERMAL ENGINEERING, 2012, 48 :155-163

[9]

Homg R.-H., 2009, IEEE J SELECTED TOP, V15

[10] Thermal Management Design from Chip to Package for High Power InGaN/Sapphire LED Applications [J].

Horng, R. H. ;

Chiang, C. C. ;

Tsai, Y. L. ;

Lin, C. P. ;

Kan, K. ;

Lin, H. I. ;

Wuu, D. S. .

ELECTROCHEMICAL AND SOLID STATE LETTERS, 2009, 12 (06) :H222-H225

← 1 2 3 4 →