Development and cell response of a new biodegradable composite scaffold for guided bone regeneration

被引:66
作者
Navarro, M
Ginebra, MP
Planell, JA
Zeppetelli, S
Ambrosio, L
机构
[1] Tech Univ Catalonia, Dept Mat Sci & Met, CREB, Barcelona 08028, Spain
[2] Univ Naples Federico II, CRIB, CNR, Inst Composite Mat Technol, I-80125 Naples, Italy
关键词
D O I
10.1023/B:JMSM.0000021113.88702.9d
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Composites of biodegradable polymers with different calcium phosphate ceramics and glasses, have been developed as scaffolds for applications in bone-tissue engineering. In this work, phosphate glass particles have been incorporated into the polymer, poly(95L/5DL) lactic acid (PLA) and porous structures were elaborated. Their porosity, compressive mechanical properties and biological response were evaluated. Interconnected structures with evenly distributed pores and a porosity as high as 97% were obtained. The incorporation of glass particles into the polymer showed to have a positive effect in the mechanical properties of the foams. Indeed, the compressive modulus increased from 74.5 to 120 KPa and the compressive strength from 17.5 to 20.1 KPa for the PLA and the PLA/glass foams, respectively. The biological response was evaluated by means of the MTT test, the materials resulted to be noncytotoxic. (C) 2004 Kluwer Academic Publishers.
引用
收藏
页码:419 / 422
页数:4
相关论文
共 17 条
[1]  
BOBYN JD, 1980, CLIN ORTHOP RELAT R, P263
[2]   CONTROLLED RELEASE GLASSES (CRG) FOR BIOMEDICAL USES [J].
BURNIE, J ;
GILCHRIST, T ;
DUFF, SRI ;
DRAKE, CF ;
HARDING, NGL ;
MALCOLM, AJ .
BIOMATERIALS, 1981, 2 (04) :244-246
[3]  
CLEMENT J, 1998, P 11 INT S CER MED, P141
[4]   Development of soluble glasses for biomedical use Part I:: In vitro solubility measurement [J].
Franks, K ;
Abrahams, I ;
Knowles, JC .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2000, 11 (10) :609-614
[5]   Macroporous biphasic calcium phosphate ceramics: influence of macropore diameter and macroporosity percentage on bone ingrowth [J].
Gauthier, O ;
Bouler, JM ;
Aguado, E ;
Pilet, P ;
Daculsi, G .
BIOMATERIALS, 1998, 19 (1-3) :133-139
[6]  
Gibson L.J., 1997, Cellular Solids: Structure and Properties, V2nd ed., P175, DOI DOI 10.1017/CBO9781139878326.007
[7]   Polymeric biomaterials [J].
Griffith, LG .
ACTA MATERIALIA, 2000, 48 (01) :263-277
[8]   BONE REGENERATION WITHIN A CORALLINE HYDROXYAPATITE IMPLANT [J].
HOLMES, RE .
PLASTIC AND RECONSTRUCTIVE SURGERY, 1979, 63 (05) :626-633
[9]   Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique [J].
Hou, QP ;
Grijpma, DW ;
Feijen, J .
BIOMATERIALS, 2003, 24 (11) :1937-1947
[10]   Scaffolds in tissue engineering bone and cartilage [J].
Hutmacher, DW .
BIOMATERIALS, 2000, 21 (24) :2529-2543