The laser drilling of multi-layer aerospace material systems

被引:89
作者
Corcoran, A [1 ]
Sexton, L
Seaman, B
Ryan, P
Byrne, G
机构
[1] Univ Coll Dublin, Dept Mech Engn, Dublin 4, Ireland
[2] SIFCO Ireland Ltd, Cork, Ireland
关键词
laser; percussion drilling; pulse energy; pulse shaped; microcracking; remelt layer; delamination;
D O I
10.1016/S0924-0136(01)01123-2
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Due to continuing advances in jet engine efficiency, components are exposed to ever-increasing combustion and exhaust gas temperatures, Air plasma sprayed thermal barrier coatings (TBCs) protect jet engine components from direct exposure to the corrosive temperatures. The TBC is affixed to the superalloy substrate by an intermediate bond coat thus producing a multi-layer material system. A laser drilling technique has been developed, to generate cooling holes in multi-layer systems, for use in the aerospace industry. The cooling holes are required to conform to standards stipulated by the original engine manufacturer (OEM). A Nd:YAG laser was used to study the parameters affecting hole generation in superalloy materials. This paper reports on the investigation into the negative effects of percussion laser drilling on material interfaces, bond strength, and the negative effects on the individual microstructures such as remelt layers and microcracking. (C) 2002 Published by Elsevier Science B.V.
引用
收藏
页码:100 / 106
页数:7
相关论文
共 7 条
[1]  
CORCORAN A, UNPUB P 16 INT C CAP
[2]  
FRENCH PW, ICALEO 98
[3]  
KAMULU J, ICALEO 98
[4]   OPTIMIZATION OF LASER DEEP-HOLE DRILLING OF INCONEL 718 USING THE TAGUCHI METHOD [J].
TAM, SC ;
YEO, CY ;
JANA, S ;
LAU, MWS ;
LIM, LEN ;
YANG, LJ ;
NOOR, YM .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1993, 37 (1-4) :741-757
[5]   A TECHNICAL REVIEW OF THE LASER DRILLING OF AEROSPACE MATERIALS [J].
YEO, CY ;
TAM, SC ;
JANA, S ;
LAU, MWS .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 42 (01) :15-49
[6]   Parametric study to improve laser hole drilling process [J].
Yilbas, BS .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 70 (1-3) :264-273
[7]  
YILBAS BS, 1996, P IMECHE, P210