Flow induced deformation of dual-phase continuity in polymer blends and alloys. Part I

被引:41
作者
Lyngaae-Jorgensen, J
Rasmussen, KL
Chtcherbakova, EA
Utracki, LA
机构
[1] Tech Univ Denmark, Dept Chem Engn, DK-2800 Lyngby, Denmark
[2] Natl Res Council Canada, Inst Ind Mat, Boucherville, PQ J4B 6Y4, Canada
关键词
D O I
10.1002/pen.11494
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
A hypothesis for formation of bi-continuous phase structures in immiscible polymer blends is proposed. It is based on the observation that a critical volume fraction phi(cr) for the dual continuity of phases may be calculated considering the geometry of the dispersed phase. The knowledge of the form of discrete domains at the volume fractions phi < phi(cr) and the probability that two close neighbor domains will form a strongly fused connection are sufficient to calculate phi(cr). Furthermore, it can be predicted that phi(cr) should increase with stabilization of the interface. A comparative study showed that an addition of block: copolymer may narrow the volume fraction range where bi-continuous phase structures are formed. Both annealing in the molten state and shearing history influence the measured phi(cr) for the formation of bi-continuous phase structure in amorphous immiscible polymer blends.
引用
收藏
页码:1060 / 1071
页数:12
相关论文
共 46 条
[1]   THE PERCOLATION LIMITS FOR 2-PHASE BLENDS OF PMMA AND COPOLYMERS OF STYRENE AND MMA [J].
ANDRADI, LN ;
HELLMANN, GP .
POLYMER, 1993, 34 (05) :925-932
[2]  
[Anonymous], 1989, POLYM ALLOYS BLENDS
[3]   PERCOLATION IN INJECTION MOLDED POLYMER BLENDS [J].
ARENDS, CB .
POLYMER ENGINEERING AND SCIENCE, 1992, 32 (13) :841-844
[4]  
Avgeropoulos G. N., 1976, RUBBER CHEM TECHNOL, V49, P93, DOI [10.5254/1.3534954, DOI 10.5254/1.3534954]
[5]   RECENT DEVELOPMENTS IN CONTINUUM PERCOLATION [J].
BALBERG, I .
PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 1987, 56 (06) :991-1003
[6]   DEVELOPMENT OF POLYMER BLEND MORPHOLOGY DURING COMPOUNDING IN A TWIN-SCREW EXTRUDER .3. EXPERIMENTAL PROCEDURE AND PRELIMINARY-RESULTS [J].
BORDEREAU, V ;
SHI, ZH ;
UTRACKI, LA ;
SAMMUT, P ;
CARREGA, M .
POLYMER ENGINEERING AND SCIENCE, 1992, 32 (24) :1846-1856
[7]   DEFORMATION OF A DROP IN A GENERAL TIME-DEPENDENT FLUID FLOW [J].
COX, RG .
JOURNAL OF FLUID MECHANICS, 1969, 37 :601-&
[8]   BLENDS OF ISOTACTIC POLYPROPYLENE AND ETHYLENE-PROPYLENE RUBBERS - RHEOLOGY, MORPHOLOGY AND MECHANICS [J].
DANESI, S ;
PORTER, RS .
POLYMER, 1978, 19 (04) :448-457
[9]  
DUDEVANI I, 1979, SPE TECH PAP, V25, P628
[10]  
ELEMANS PHM, 1988, INTEGRATION FUNDAMEN