CFD-Aerosol Modeling of the Effects of Wall Composition and Inlet Conditions on Carbon Nanotube Catalyst Particle Activity

被引:8
作者
Brown, David P. [1 ,2 ,3 ]
Nasibulin, Albert G. [1 ,2 ]
Kauppinen, Esko I. [1 ,2 ]
机构
[1] Aalto Univ, Ctr New Mat, FIN-02150 Espoo, Finland
[2] Aalto Univ, Dept Engn Math & Phys, FIN-02150 Espoo, Finland
[3] StreamWise, St Petersburg, FL 33715 USA
基金
芬兰科学院;
关键词
Carbon Nanotubes; CNT; Computational Fluid Dynamics; CFD; Catalyst; Aerosol; Particle; Method of Moments; Evaporation; Coagulation; Population Balance; Chemical Kinetics;
D O I
10.1166/jnn.2008.453
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The evolution of iron catalyst particles during aerosol (floating catalyst) Chemical Vapor Deposition (CVD) synthesis of Carbon Nanotubes (CNTs) from CO is computed using a multi species Computational Fluid Dynamics (CFD) model incorporating a lognormal aerosol method of moments (MOM) to describe their dynamics and a combined chemical kinetics and equilibrium model for catalytic production of CO2. The influence of the presence of iron at the reactor walls, the fed particle size, number concentration and polydispersity and the effect of the catalytic production of CO2 at the reactor wall are studied in terms of particle size, concentration and polydispersity and reagent concentration during CNT synthesis. It is found that iron catalyst particle dynamics are essentially insensitive to wall iron concentrations and, for a wide range of particle sizes and concentrations, it is found that the catalyst particles are stable up to a critical CNT window in which CNT nucleation and growth occurs. Concentrations of catalyst particles significantly above 1 x 10(14) #/m(3), however, lead to poor control over catalyst particle size and polydispersity at the CNT nucleation front which, in turn, leads to poor control over CNT diameter. The location of the growth window is shown to be directly associated with the availability of catalytically produced CO2 diffusing from the reactor walls to the reactor core. These results help to explain the large variations in CNT diameter and chirality and the inefficient use of catalyst material in other floating catalyst CNT processes based on in-situ catalyst particle synthesis.
引用
收藏
页码:3803 / 3819
页数:17
相关论文
共 30 条
[1]   DISPROPORTIONATION OF CO ON IRON COBALT ALLOYS .1. THERMODYNAMIC STUDY [J].
AUDIER, M ;
COULON, M ;
BONNETAIN, L .
CARBON, 1983, 21 (02) :93-97
[2]   DEPOSITION OF LOGNORMALLY DISTRIBUTED AEROSOLS ACCOUNTING FOR SIMULTANEOUS DIFFUSION, THERMOPHORESIS AND COAGULATION [J].
BAI, HL ;
BISWAS, P .
JOURNAL OF AEROSOL SCIENCE, 1990, 21 (05) :629-640
[3]   Gas-phase production of carbon single-walled nanotubes from carbon monoxide via the HiPco process: A parametric study [J].
Bronikowski, MJ ;
Willis, PA ;
Colbert, DT ;
Smith, KA ;
Smalley, RE .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2001, 19 (04) :1800-1805
[4]   A method of moments based CFD model for polydisperse aerosol flows with strong interphase mass and heat transfer [J].
Brown, David P. ;
Kauppinen, Esko I. ;
Jokiniemi, Jorma K. ;
Rubin, Stanley G. ;
Biswas, Pratim .
COMPUTERS & FLUIDS, 2006, 35 (07) :762-780
[5]  
BROWN DP, 1996, THESIS U CINCINNATI
[6]  
BROWN DP, 1994, FACT COMBUSTION MODE, V18
[7]  
BROWN DP, 1998, 97158 NIST SBIR
[8]  
BROWN DP, 1995, 6 INT S COMP FLUID D, V1, P129
[9]  
Dresselhaus MS, 1996, Science of fullerenes and carbon nanotubes: Their properties and applications
[10]   CFD prediction of carbon nanotube production rate in a CVD reactor [J].
Endo, H ;
Kuwana, K ;
Saito, K ;
Qian, D ;
Andrews, R ;
Grulke, EA .
CHEMICAL PHYSICS LETTERS, 2004, 387 (4-6) :307-311