Optimum operating conditions in drying foodstuffs with superheated steam

被引:30
作者
Elustondo, DM
Mujumdar, AS
Urbicain, MJ
机构
[1] Univ Nacl Sur, CONICET, PLAPIQUI, RA-8000 Bahia Blanca, Argentina
[2] Natl Univ Singapore, Dept Engn Mech, Singapore 117548, Singapore
关键词
drying rate; energy; fixed bed dryer; optimum pressure; packed bed; rotary dryer; steam drying;
D O I
10.1081/DRT-120002548
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
It is inferred from experimental data that in drying foodstuffs with superheated steam, the initial drying rate has a direct effect on the rate at which the overall drying takes place. That is, the faster the initial drying rate, the shorter the overall drying time. This criterion is very convenient because at the beginning, water moistens the sample external surface so evaporation does not depend on internal sample characteristics, but only on external convective heat and mass transfer rates. Mass and energy balance equations are solved and the result converted into a general initial drying rate equation, in which all dryer characteristics are grouped into one dimensionless parameter. The initial drying rate equation is mathematicallymaximized and the optimum working conditions determined. The result shows that initial drying rate always increase with increases of either the superheated steam temperature or velocity, but once these two variables are fixed, there exists at least one "optimum" pressure at which the initial drying rate is a maximum. Finally, the initial drying rate and optimum condition equations are applied to three model dryers. a dryer for a flat sheet. a fixed bed dryer and a rotary dryer. In each case, numeric Values are computed and plotted as drying rate versus pressure Curves, in which the optimum drying rate is also included, Also presented is a chart to compare the optimum pressures as functions of temperature and,team velocity for the three dryers.
引用
收藏
页码:381 / 402
页数:22
相关论文
共 19 条
[1]  
[Anonymous], 1997, MATH MODELING NUMERI
[2]  
Bird R.B., 2006, TRANSPORT PHENOMENA, Vsecond, DOI 10.1002/aic.690070245
[3]  
CEMKOWSKI S, 1996, CANADIAN AGR ENG, V38
[4]  
CHEN SR, 1992, DRY TECHNOL, V10, P251
[5]   Mathematical modeling of moisture evaporation from foodstuffs exposed to subatmospheric pressure superheated steam [J].
Elustondo, D ;
Elustondo, MP ;
Urbicain, MJ .
JOURNAL OF FOOD ENGINEERING, 2001, 49 (01) :15-24
[6]  
KREITH F, 1969, PRINCIPLES HEAT TRAN
[7]  
Lewis G. N., 1961, THERMODYNAMICS
[8]  
MOYNE C, 1990, INT CHEM ENG, V30, P654
[9]  
Mujumdar A.S., 2000, Mujumdar's Practical Guide to Industrial Drying
[10]   DRYING TECHNOLOGIES OF THE FUTURE [J].
MUJUMDAR, AS .
DRYING TECHNOLOGY, 1991, 9 (02) :325-347