On energy harvesting from ambient vibration

Future MEMS devices will harvest energy from their environment. One can envisage an autonomous condition monitoring vibration sensor being powered by that same vibration, and transmitting data over a wireless link; inaccessible or hostile environments are obvious areas of application. The base excitation of an elastically mounted magnetic seismic mass moving past a coil, considered previously by several authors, is analysed in detail. The amplitude of the seismic mass is limited in any practical device and this, together with the magnitude and frequency of the excitation define the maximum power that can be extracted from the environment. The overall damping coefficient (part of which is mechanical) is associated with the harvesting and dissipation of energy and also the transfer of energy from the vibrating base into the system. It is shown that net energy flow from the base through the damper is positive (negative) for omega >omega(n) (omega <omega(n)), but is zero when omega=omega(n). The mechanical part of the damper cannot contribute more power than it dissipates and is neutral, at best, when omega/omega(n) -> infinity. Maximum power is delivered to an electrical load when its resistance is equal to the sum of the coil internal resistance and the electrical analogue of the mechanical damping coefficient, which differs from what has been claimed. A highly damped system has the advantage of harvesting energy over a wider band of excitation frequencies on either side of the natural frequency, is smaller, but will harvest marginally less power. One possible strategy for variable amplitude excitation is proposed. (c) 2005 Elsevier Ltd. All rights reserved.