The effect of RuO2/Pt hybrid bottom electrode structure on the microstructure and ferroelectric properties of sol-gel derived PZT thin films

被引：16

作者：

Kim, SH ^{[1
]}

Hong, JG ^{[1
]}

Gunter, JC ^{[1
]}

Lee, HY ^{[1
]}

Streiffer, SK ^{[1
]}

Kingon, AI ^{[1
]}

机构：

[1] N Carolina State Univ, Dept Mat Sci & Engn, Raleigh, NC 27695 USA

来源：

FERROELECTRIC THIN FILMS VI | 1998年 / 493卷

关键词：

D O I：

10.1557/PROC-493-131

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ferroelectric PZT thin films on thin RuO2 (10, 30, 50nm)/Pt hybrid bottom electrodes were successfully prepared by using a modified chemical solution deposition method. It was observed that the use of a 10nm RuO2/Pt bottom electrode reduced leakage current, and gave more reliable capacitors with good microstructure compare to the use of thicker RuO2/Pt bottom electrodes. Typical P-E hysteresis behavior was observed even at an applied voltage of 3V, demonstrating greatly improved remanence and coercivity. Fatigue and breakdown characteristics, measured at 5V, showed stable behavior, and only below 13-15% degradation was observed up to 10(10) cycles. Thicker RuO2 layers resulted in high leakage current density due to conducting lead ruthenate or PZT pyrochlore-ruthenate and a rosette-type microstructure.

引用

页码：131 / 136

页数：6