Controlling Ion Motion in Polymer Light-Emitting Diodes Containing Conjugated Polyelectrolyte Electron Injection Layers

被引:69
作者
Garcia, Andres [1 ]
Bakus, Ronald C., II [1 ]
Zalar, Peter [1 ]
Hoven, Corey V. [2 ]
Brzezinski, Jacek Z. [1 ]
Nguyen, Thuc-Quyen [1 ]
机构
[1] Univ Calif Santa Barbara, Ctr Polymers & Organ Solids, Dept Chem & Biochem, Santa Barbara, CA 93106 USA
[2] Univ Calif Santa Barbara, Ctr Polymers & Organ Solids, Dept Mat, Santa Barbara, CA 93106 USA
基金
美国国家科学基金会;
关键词
ELECTROCHEMICAL-CELLS; POLY(ETHYLENE OXIDE); SOLID-ELECTROLYTE; TRANSPORT; CONDUCTIVITY; MORPHOLOGY; EFFICIENT; FIELD; AGGREGATION; FILMS;
D O I
10.1021/ja106268w
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The properties and function of an anionic conjugated polyelectrolyte (CPE)-containing ion-conducting polyethylene oxide pendant (PFPEOCO2Na) as electron injection layers (EILs) in polymer light-emitting diodes (PLEDs) are investigated. A primary goal was to design a CPE structure that would enable acceleration of the device temporal response through facilitation of ion motion. Pristine PLEDs containing PFPEOCO2Na exhibit luminance response times on the order of tenths of seconds. This delay is attributed to the formation of ordered structures within the CPE film, as observed by atomic force microscopy. Complementary evidence is provided by electron transport measurements. The ordered structures are believed to slow ion migration within the CPE EIL and hence result in a longer temporal response time. It is possible to accelerate the response by a combination of thermal and voltage treatments that "lock" ions within the interfaces adjacent to PFPEOCO2Na. PLED devices with luminance response times of microseconds, a 10(5) fold enhancement, can therefore be achieved. Faster luminance response time opens up the application of PLEDs with CPE layers in display technologies.
引用
收藏
页码:2492 / 2498
页数:7
相关论文
共 84 条
[1]   Characterization of Multicomponent Polymer Trilayers with Resonant Soft X-Ray Reflectivity [J].
Ade, H. ;
Wang, C. ;
Garcia, A. ;
Yan, H. ;
Sohn, K. E. ;
Hexemer, A. ;
Bazan, G. C. ;
Nguyen, T. -Q. ;
Kramer, E. J. .
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2009, 47 (13) :1291-1299
[2]   RUBBERY SOLID ELECTROLYTES WITH DOMINANT CATIONIC TRANSPORT AND HIGH AMBIENT CONDUCTIVITY [J].
ANGELL, CA ;
LIU, C ;
SANCHEZ, E .
NATURE, 1993, 362 (6416) :137-139
[3]  
[Anonymous], 1976, POLYETHYLENE OXIDE
[4]  
Armand M. B., 1979, Fast Ion Transport in Solids. Electrodes and Electrolytes, P131
[5]   POLYMER ELECTROLYTES [J].
ARMAND, MB .
ANNUAL REVIEW OF MATERIALS SCIENCE, 1986, 16 :245-261
[6]  
Bernius MT, 2000, ADV MATER, V12, P1737, DOI 10.1002/1521-4095(200012)12:23<1737::AID-ADMA1737>3.0.CO
[7]  
2-N
[8]   MICROSCOPIC INVESTIGATION OF IONIC-CONDUCTIVITY IN ALKALI-METAL SALTS POLY(ETHYLENE OXIDE) ADDUCTS [J].
BERTHIER, C ;
GORECKI, W ;
MINIER, M ;
ARMAND, MB ;
CHABAGNO, JM ;
RIGAUD, P .
SOLID STATE IONICS, 1983, 11 (01) :91-95
[9]   Polymer/metal interfaces and the performance of polymer light-emitting diodes [J].
Bharathan, JM ;
Yang, Y .
JOURNAL OF APPLIED PHYSICS, 1998, 84 (06) :3207-3211
[10]   Electron and hole transport in poly(p-phenylene vinylene) devices [J].
Blom, PWM ;
deJong, MJM ;
Vleggaar, JJM .
APPLIED PHYSICS LETTERS, 1996, 68 (23) :3308-3310