Low conductivity plasma sprayed thermal barrier coating using hollow psz spheres: Correlation between thermophysical properties and microstructure

Life and thermal properties of plasma sprayed TBCs - widely used in gas turbine engines - are closely related to the microstructure of the ceramic top coating. Especially, the thermal behaviour of this coating is induced by the void shapes and networks which are in turn determined by both the spraying conditions and the feedstock material. A specific hollow yttria partially stabilised zirconia powder was produced in a one-step process by spray drying and an experimental statistical design study was conducted to investigate the influence of spraying variables (primary and secondary gas flow rates, are current, spraying distance, spraying angle and traverse speed) on structure and properties of resulting plasma sprayed coatings. The coatings were characterized with respect to deposition efficiency, roughness, porosity and thermal conductivity. A reduction of 25% of the thermal conductivity was achieved by improving the spray and powder parameters. A quantitative characterization of the porous structure using image analysis of polished cross-sections was implemented. The parameters that have relevant influence on the coating porous structure were identified, and their relative importance was detertnined. An attempt was made to identify morphological criteria of the porous network (coarse/fine porosity ratio, cracks total length, cracks orientation) correlating with the thermal conductivity values. (c) 2007 Elsevier B.V. All rights reserved.