Filling the voids in the SRTM elevation model - A TIN-based delta surface approach

被引:71
作者
Luedeling, Eike
Siebert, Stefan
Buerkert, Andreas
机构
[1] Univ Kassel, Dept Plant Prod & Agroecosyst Res Trop & Subtrop, D-37213 Witzenhausen, Germany
[2] Univ Frankfurt, Inst Phys Geog, D-60438 Frankfurt, Germany
关键词
DEM/DTM; radar; satellite; accuracy; GIS; modeling; algorithms; processing; SHUTTLE RADAR TOPOGRAPHY; MOUNTAIN OASIS; MISSION DATA; VALIDATION; HEIGHT; OMAN;
D O I
10.1016/j.isprsjprs.2007.05.004
中图分类号
P9 [自然地理学];
学科分类号
0705 ; 070501 ;
摘要
The Digital Elevation Model (DEM) derived from NASA's Shuttle Radar Topography Mission is the most accurate near-global elevation model that is publicly available. However, it contains many data voids, mostly in mountainous terrain. This problem is particularly severe in the rugged Oman Mountains. This study presents a method to fill these voids using a fill surface derived from Russian military maps. For this we developed a new method, which is based on Triangular Irregular Networks (TINs). For each void, we extracted points around the edge of the void from the SRTM DEM and the fill surface. TINs were calculated from these points and converted to a base surface for each dataset. The fill base surface was subtracted from the fill surface, and the result added to the SRTM base surface. The fill surface could then searnlessly be merged with the SRTM DEM. For validation, we compared the resulting DEM to the original SRTM surface, to the fill DEM and to a surface calculated by the International Center for Tropical Agriculture (CIAT) from the SRTM data. We calculated the differences between measured GPS positions and the respective surfaces for 187,500 points throughout the mountain range (Delta GPS). Comparison of the means and standard deviations of these values showed that for the void areas, the fill surface was most accurate, with a standard deviation of the Delta GPS from the mean Delta GPS of 69 m, and only little accuracy was lost by merging it to the SRTM surface (standard deviation of 76 m). The CIAT model was much less accurate in these areas (standard deviation of 128 m). The results show that our method is capable of transferring the relative vertical accuracy of a fill surface to the void areas in the SRTM model, without introducing uncertainties about the absolute elevation of the fill surface. It is well suited for datasets with varying altitude biases, which is a common problem of older topographic information. (C) 2007 Intemational Society for Photogrammetry and Remote Sensing, Inc. (ISPRS). Published by Elsevier B.V All rights reserved.
引用
收藏
页码:283 / 294
页数:12
相关论文
共 28 条
[1]  
[Anonymous], SHUTTL RAD TOP MISS
[2]  
BERTHIER E, 2006, GEOPHYS RES LETT, V33
[3]   Assessment of C-band SRTM DEM in a dense equatorial forest zone [J].
Bourgine, B ;
Baghdadi, N .
COMPTES RENDUS GEOSCIENCE, 2005, 337 (14) :1225-1234
[4]   Validation of the shuttle radar topography mission height data [J].
Brown, CG ;
Sarabandi, K ;
Pierce, LE .
IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, 2005, 43 (08) :1707-1715
[5]   Nutrient cycling and field-based partial nutrient balances in two mountain oases of Oman [J].
Buerkert, A ;
Nagieb, M ;
Siebert, S ;
Khan, I ;
Al-Maskri, A .
FIELD CROPS RESEARCH, 2005, 94 (2-3) :149-164
[6]  
*CIAT, 2004, HOL FILL SEAML SRTM
[7]  
FALORNI G, 2005, J GEOPHYS RES EARTH, V110
[8]  
Grohman G, 2006, PHOTOGRAMM ENG REM S, V72, P213
[9]   Characterization and quantification of data voids in the shuttle radar iopography mission data [J].
Hall, O ;
Falorni, G ;
Bras, RL .
IEEE GEOSCIENCE AND REMOTE SENSING LETTERS, 2005, 2 (02) :177-181
[10]   Validation of SRTM elevations over vegetated and non-vegetated terrain using medium footprint lidar [J].
Hofton, M ;
Dubayah, R ;
Blair, JB ;
Rabine, D .
PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING, 2006, 72 (03) :279-285