Review of formulations for structural and mechanical system optimization

Alternative formulations for optimization and simulation of structural and mechanical systems and other related fields are reviewed. The material is divided roughly into two parts. Part 1 focuses on the developments in structural and mechanical systems, including configuration and topology optimization. Here the formulations are classified into three broad categories: (i) the conventional formulation where only the structural design variables are treated as optimization variables, (ii) simultaneous analysis and design (SAND) formulations where design and some of the state variables are treated as optimization variables, and (iii) a displacement-based two-phase approach where the displacements are treated as unknowns in the outer loop and the design variables as the unknowns in the inner loop. Part 2 covers more general formulations that are applicable to diverse fields, such as economics, optimal control, multidisciplinary problems and other engineering disciplines. In these fields, SAND-type formulations have been called mathematical programs with equilibrium constraints (MPEC), and partial differential equations (PDE)-constrained optimization problems. These formulations are viewed as generalizations of the SAND formulations developed in the structural optimization field. Based on the review, it is concluded that the basic ideas of the formulations presented in diverse fields can be integrated to conduct further research and develop alternative formulations and solution procedures for practical engineering applications. The paper lists 187 references on the subject.