Burnishing force and number of ball passes for the optimum surface finish of brass components

被引：72

作者：

Hassan, AM ^{[1
]}

Al-Jalil, HF

Ebied, AA

机构：

[1] Jordan Univ Sci & Technol, Dept Mech Engn, Irbid, Jordan

[2] Jordan Univ Sci & Technol, Agr Engn & Technol Dept, Irbid, Jordan

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1998年 / 83卷 / 1-3期

关键词：

burnishing force; ball passes; optimum surface finish;

D O I：

10.1016/S0924-0136(98)00058-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the optimization of surface finish for ball-burnishing brass components using the response surface method. A mathematical model was established to correlate the most pronounced parameters, i.e. the burnishing force and the number of tool passes, with the surface finish. The model predicted that an optimum surface finish of 0.172 mu m can be obtained when burnishing at a force of 20.7 kgf (203 N) with two passes of the burnishing tool. (C) 1998 Elsevier Science S.A. AV rights reserved.

引用

页码：176 / 179

页数：4

共 6 条

[1] INVESTIGATIONS INTO THE BURNISHING OF EXTERNAL CYLINDRICAL SURFACES OF 70/30 CU-ZN ALLOY [J].

FATTOUH, M ;

ELAXIR, MH ;

SERAGE, SM .

WEAR, 1988, 127 (02) :123-137

[2] Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals [J].

Hassan, AM ;

AlBsharat, AS .

WEAR, 1996, 199 (01) :1-8

[3]

Montgomery D. C., 1991, DESIGN ANAL EXPT

[4]

MORIMOTO T, 1988, WEAR, V127, P148

[5] BURNISHING OF METALLIC SURFACES - A REVIEW [J].

MURTHY, RL ;

KOTIVEERACHARI, B .

PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1981, 3 (03) :172-179

[6] INCREASING WEAR-RESISTANCE OF STEEL COMPONENTS BY BALL BURNISHING [J].

RAJASEKARIAH, R ;

VAIDYANATHAN, S .

WEAR, 1975, 34 (02) :183-188

← 1 →