Basic properties of palm oil biodiesel-diesel blends

被引：346

作者：

Benjumea, Pedro ^{[1
]}

Agudelo, John ^{[2
]}

Agudejo, Andres ^{[2
]}

机构：

[1] Univ Nacl Colombia Medellin, Fac Mines, Energy Inst, Alternat Fuels Grp, Bogota, Colombia

[2] Univ Antioquia, Fac Engn, Grp Energy Efficient Management GIMEL, Bogota, Colombia

来源：

FUEL | 2008年 / 87卷 / 10-11期

关键词：

palm oil biodiesel; blends; basic properties; mixing rules;

D O I：

10.1016/j.fuel.2007.11.004

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The basic properties of several palm oil biodiesel-diesel fuel blends were measured according to the corresponding ASTM standards. In order to predict these properties, mixing rules are evaluated as a function of the volume fraction of biodiesel in the blend. Kay's mixing rule is used for predicting density, heating value, three different points of the distillation curve (T 10, T50 and T90), cloud point and calculated cetane index, while an Arrhenius mixing rule is used for viscosity. The absolute average deviations (AAD) obtained were low, demonstrating the suitability of the used mixing rules. It was found that the calculated cetane index of palm oil biodiesel obtained using ASTM D4737 is in better agreement with the reported cetane number than the one corresponding to the ASTM D976. This result is most likely due to the fact that the former standard takes into account the particular characteristics of the distillation curve. (C) 2007 Elsevier Ltd. All rights reserved.

引用

页码：2069 / 2075

页数：7

共 28 条

[1]

Ahmed T., 1989, HYDROCARBON PHASE BE

[2] Predicting the viscosity of biodiesel fuels from their fatty acid ester composition [J].

Allen, CAW ;

Watts, KC ;

Ackman, RG ;

Pegg, MJ .

FUEL, 1999, 78 (11) :1319-1326

[3] The potential of using vegetable oil fuels as fuel for diesel engines [J].

Altin, R ;

Çetinkaya, S ;

Yücesu, HS .

ENERGY CONVERSION AND MANAGEMENT, 2001, 42 (05) :529-538

[4]

American Society for Testing and Materials [ASTM], 2005, D250005 ASTM

[5]

[Anonymous], 2005, D8605 ASTM

[6]

[Anonymous], 2005, D473704 ASTM

[7]

*ASTM, 2005, D28792 ASTM

[8]

*ASTM, 2005, D44502 ASTM

[9]

*ASTM, 2005, D976 ASTM

[10]

*ASTM, 2005, D24002 ASTM

← 1 2 3 →