Thermal treatments of activated carbon fibres using a microwave furnace

Thermal treatment of activated carbon fibres (ACF) in a flow of N-2 gas has been carried out using a microwave device operating at 2450 MHz and with a power input of 1000 W, instead of a conventional furnace, and the samples were analysed by means of low temperature N2 adsorption, elemental analysis and determination of points of zero charge. The results show that microwave treatment for periods between 5 and 30 min affects the porosity of the ACF, causing a reduction in micropore volume and micropore size. More importantly, the results also show that microwave treatment is a very effective method for modifying the surface chemistry of the ACF. During microwave treatment surface groups are completely eliminated, whereas oxygen and nitrogen atoms bonded within the pseudo-graphitic layer planes are retained. On re-exposure to air the surface groups only reform to a very limited extent and as a result very basic carbons, with points of zero charge approximately equal to 11, are readily obtained. (C) 2001 Elsevier Science B.V. All rights reserved.