Optimum glass formation at off-eutectic composition and its relation to skewed eutectic coupled zone in the La based La-Al-(Cu,Ni) pseudo ternary system

被引:171
作者
Tan, H
Zhang, Y
Ma, D
Feng, YP
Li, Y [1 ]
机构
[1] Natl Univ Singapore, Dept Mat Sci, Singapore 119260, Singapore
[2] Inst Mat Res & Engn, Singapore 117602, Singapore
[3] Natl Univ Singapore, Dept Phys, Singapore 119260, Singapore
关键词
bulk metallic glass; composite; solidification;
D O I
10.1016/S1359-6454(03)00291-X
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Glass formation and its relation to the dendritic and eutectic growth has been investigated for the La100-x[Al-0.412(Cu,Ni)(0.588)](x) (x = 30-56.3) and La86-yAl14(Cu,Ni)(y) (y = 16-29) alloy systems. The experimental results show that in the La-rich pseudo ternary La-Al-(Cu,Ni) system, optimum glass formation actually occurs at an off-eutectic composition. A nearly fully amorphous rod with 12 mm in diameter can be obtained at an off-eutectic composition near La62Al15.7(Cu,Ni)(22.3), while only a 1.5 mm diameter rod can be obtained fully amorphous for the eutectic alloy La66Al14(Cu,Ni)(20). A strong dependence of GFA on the composition is observed for these alloys. In addition, formation of a composite (i.e. alphaLa dendrite reinforced glass matrix) in 12 mm diameter cast rods is observed over a wide range of composition, including the eutectic composition. It has been found that the GFA does not correlate well with the extent of the undercooled liquid region (DeltaT(x)) and is not even closely related to the reduced glass transition temperature (T-rg). These unusual observations in glass formation and its relation to the skewed eutectic coupled zone have been explained in terms of the competition between the growth of crystalline phases (i.e. eutectic and dendritic phases) and the formation of the amorphous phase. (C) 2003 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:4551 / 4561
页数:11
相关论文
共 24 条
[1]  
Boettinger W. J., 1982, Rapidly Solidified Amorphous and Crystalline Alloys. Proceedings of the Materials Research Society Annual Meeting, P15
[2]   Multicomponent chemical short range order undercooling and the formation of bulk metallic glasses [J].
Chen, GL ;
Hui, XD ;
He, G ;
Bian, Z .
MATERIALS TRANSACTIONS, 2001, 42 (06) :1095-1102
[3]   Bulk metallic glasses in the Zr-Al-Ni-Cu system [J].
Chen, W ;
Wang, Y ;
Qiang, J ;
Dong, C .
ACTA MATERIALIA, 2003, 51 (07) :1899-1907
[4]  
DAVIES HA, 1978, RAPIDLY QUENCHED MET, V3, P1
[5]   Novel Ti-base nanostructure-dendrite composite with enhanced plasticity [J].
He, G ;
Eckert, J ;
Löser, W ;
Schultz, L .
NATURE MATERIALS, 2003, 2 (01) :33-37
[6]   Glass forming ability and in-situ composite formation in Pd-based bulk metallic glasses [J].
Hu, X ;
Ng, SC ;
Feng, YP ;
Li, Y .
ACTA MATERIALIA, 2003, 51 (02) :561-572
[7]   Stabilization of metallic supercooled liquid and bulk amorphous alloys [J].
Inoue, A .
ACTA MATERIALIA, 2000, 48 (01) :279-306
[8]   BULKY LA-AL-TM (TM = TRANSITION-METAL) AMORPHOUS-ALLOYS WITH HIGH-TENSILE STRENGTH PRODUCED BY A HIGH-PRESSURE DIE-CASTING METHOD [J].
INOUE, A ;
NAKAMURA, T ;
SUGITA, T ;
ZHANG, T ;
MASUMOTO, T .
MATERIALS TRANSACTIONS JIM, 1993, 34 (04) :351-358
[9]   PRODUCTION OF AMORPHOUS CYLINDER AND SHEET OF LA55AL25NI20 ALLOY BY A METALLIC MOLD CASTING METHOD [J].
INOUE, A ;
ZHANG, T ;
MASUMOTO, T .
MATERIALS TRANSACTIONS JIM, 1990, 31 (05) :425-428
[10]   Bulk amorphous metal - An emerging engineering material [J].
Johnson, WL .
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2002, 54 (03) :40-43