An evaluation of R22 substitutes performances regulating continuously the compressor refrigeration capacity

被引:43
作者
Aprea, C
Mastrullo, R
Renno, C
Vanoli, GP
机构
[1] Univ Salerno, Dept Mech Engn, I-84084 Fisciano, Salerno, Italy
[2] Univ Naples Federico II, DETEC, I-80125 Naples, Italy
[3] Univ Sannio, Dept Engn, I-82100 Benevento, Italy
关键词
refrigerating system; variable speed compressor; energy saving; R22; substitutes;
D O I
10.1016/S1359-4311(03)00187-X
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper presents the results of an experimental analysis which compares in terms of energetic performances the refrigeration capacity control obtained by means of a variable-speed compressor with the on/ off control deriving from a classical thermostatic device. The compressor considered is semi-hermetic reciprocating and is a component of a vapour compression refrigeration plant subjected to a commercially available cold store. The compressor working with the fluids R22, R507 and R407C and designed for a revolution speed corresponding to the compressor supply current nominal frequency of 50 Hz, has been tested varying the frequency in the range 30-50 Hz. In this range, the most suitable working fluids proposed as substitutes of the R22 as the R407C (R32/R125/R134a 23/25/52% in mass), the R507 (R125/R143A 50/ 50% in mass) and the R417A (R125/R134a/R600 46.6/50/3.4% in mass) have been tested. The results show that, using the R407C, it is possible an average an electric energy consumption about 12% smaller when an inverter is employed to control the compressor refrigeration capacity instead of the thermostatic control which imposes on/off cycles on the compressor, working at the nominal frequency of 50 Hz. So the R407C confirms its superiority in comparison with the R417A and R507; only the R22 shows a better performance. (C) 2003 Elsevier Ltd. All rights reserved.
引用
收藏
页码:127 / 139
页数:13
相关论文
共 20 条
[1]  
APREA C, 2001, 7 WORLD C CLIMA 2000
[2]  
BENAMER A, 1998, AFF ELEC, P53
[3]  
BINNEBERG P, 1999, P 20 INT C REFR SYDN
[4]  
COHEN R, 1974, P PURD COMPR TECHN C, P50
[5]  
COLBY SR, 1990, IEEE T MAY, P18
[6]  
FORNASIERI E, 1983, FREDDO, V37, P163
[7]  
FREDSTED JP, 1999, P 20 INT C REFR SYDN
[8]  
*ISO, 1999, 13005 ISO UNI CEI EN
[9]  
JANG K, 1999, P 20 INT C REFR SYDN
[10]  
KRUEGER M, 1994, P INT C ENG C PURD U, V2, P599