Modelling cloud data for prototype manufacturing

In this paper, the authors have developed a novel method to integrate reverse engineering (RE) and rapid prototyping (RP). Unorganised cloud data are directly sliced and modelled with two-dimensional (2D) cross-sections. Based on such a 2D CAD model, the data points are directly converted into RP slice data and fed to an RP machine for fabricating. In this process, neither a surface model nor a STL file is generated. This is accomplished from the 3D data points in several steps: first, the cloud data are sliced into a number of layers along a user-specified direction. The points in each layer are projected onto a plane. Secondly, the points on each plane are sorted and compressed. Data point smoothing is then carried out using a discrete curvature based method. Thirdly, a local interpolating method is used for adding additional points to the slice-lines having insufficient points. Fourthly, the cross-sections between every two neighbouring planes are created by directly connecting the feature points (FPs) with straight-line segments. Finally, an RP layered file is generated for an SLA machine. The developed methods have been implemented with CIC++ on the Unigraphics platform. (C) 2003 Elsevier Science B.V. All rights reserved.