An elastic-plastic-cracking model for finite element analysis of indentation cracking in brittle materials

被引：85

作者：

Zhang, W ^{[1
]}

Subhash, G ^{[1
]}

机构：

[1] Michigan Technol Univ, Dept Mech Engn Engn Mech, Houghton, MI 49931 USA

来源：

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES | 2001年 / 38卷 / 34-35期

基金：

美国国家科学基金会;

关键词：

Vickers indentation; brittle cracking model; hardness; brittleness;

D O I：

10.1016/S0020-7683(00)00406-6

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

An 'elastio-plastic-cracking' (EPC) constitutive model was developed and incorporated into the commercial explicit finite element package ABAQUS to analyze the fracture characteristics of brittle materials subjected to indentation loads. The analysis indicated that the EPC model can capture the development of median cracks during the loading phase and the development of lateral cracks during the unloading phase of the Vickers indentation cycle. The influence of material properties on induced damage zone characteristics was analyzed by defining a non-dimensional brittleness parameter. The model predictions of hardness as well as load-depth (P-h) relationship during an indentation cycle were found to agree well with the experimental trends presented elsewhere in the literature. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：5893 / 5913

页数：21

共 38 条

[1] Sliding microindentation fracture of brittle materials: Role of elastic stress fields [J].

Ahn, Y ;

Farris, TN ;

Chandrasekar, S .

MECHANICS OF MATERIALS, 1998, 29 (3-4) :143-152

[2] Dynamic Vickers indentation of brittle materials [J].

Anton, RJ ;

Subhash, G .

WEAR, 2000, 239 (01) :27-35

[3]

*ASM INT, 1989, ASM ENG MAT REF BOOK

[4]

Bauccio Michael, 1994, ASM ENG MAT REFERENC

[5] FINITE-ELEMENT SIMULATION OF INDENTATION EXPERIMENTS [J].

BHATTACHARYA, AK ;

NIX, WD .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1988, 24 (09) :881-891

[6] Elastic-plastic indentation stress fields using the finite-element method [J].

Care, G ;

FischerCripps, AC .

JOURNAL OF MATERIALS SCIENCE, 1997, 32 (21) :5653-5659

[7] THE RESPONSE OF SOLIDS TO ELASTIC PLASTIC INDENTATION .1. STRESSES AND RESIDUAL-STRESSES [J].

CHIANG, SS ;

MARSHALL, DB ;

EVANS, AG .

JOURNAL OF APPLIED PHYSICS, 1982, 53 (01) :298-311

[8] AN INCREMENTAL STRESS-BASED CONSTITUTIVE MODELING ON ANISOTROPIC DAMAGED MATERIALS [J].

CHOW, CL ;

LIU, YJ ;

ASUNDI, A .

INTERNATIONAL JOURNAL OF FRACTURE, 1993, 64 (04) :299-319

[9] DIRECT OBSERVATION AND ANALYSIS OF INDENTATION CRACKING IN GLASSES AND CERAMICS [J].

COOK, RF ;

PHARR, GM .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (04) :787-817

[10] DYNAMIC FAILURE MECHANISMS OF CERAMIC BARS - EXPERIMENTS AND NUMERICAL SIMULATIONS [J].

ESPINOSA, HD ;

BRAR, NS .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1995, 43 (10) :1615-&

← 1 2 3 4 →