Passive flux meter measurement of water and nutrient flux in saturated porous media: Bench-scale laboratory tests

The passive nutrient flux meter (PNFM) is introduced for simultaneous measurement of both water and nutrient flux through saturated porous media. The PNFM comprises a porous sorbent pre-equilibrated with a suite of alcohol tracers, which have different partitioning coefficients. Water flux was estimated based on the loss of loaded resident tracers during I deployment, while nutrient flux was quantified based on the nutrient solute mass captured on the sorbent. An anionic resin, Lewatit 6328 A, was used as a permeable sorbent and phosphate (PO43-) was the nutrient studied, The phosphate sorption capacity of the resin was measured in batch equilibration tests as 56 mg PO43- g(-1), which was determined to be adequate capacity to retain PO43- loads intercepted over typical PNFM I deployment periods in most natural systems. The PNFM design was validated with bench-scale laboratory tests for a range of 9.8 to 28.3 cm d(-1) Darcy velocities and 6 to 43 h deployment durations. Nutrient and water fluxes measured by the PNFM averaged within 6 and 12% of the applied values, respectively, indicating that the PNFM shows promise as a toot for simultaneous measurement of water and nutrient fluxes.