The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering

被引：41

作者：

Cao, Guojian

Geng, Lin

Zheng, Zhenzhu

Naka, Masaaki

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China

[2] Osaka Univ, Joining & Welding Res Inst, Osaka 5670047, Japan

来源：

INTERMETALLICS | 2007年 / 15卷 / 12期

关键词：

nickel aluminides; based on Ni3Al; nanostructured intermetallics; powder metallurgy; oxidation;

D O I：

10.1016/j.intermet.2007.07.003

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Nanocrystalline Ni3Al was fabricated through mechanical alloying of elemental powders and spark plasma sintering. The nanocrystalline Ni3Al has a nearly full density after being sintered at 1223 K for 10 min under a pressure of 65 MPa. Isothermal and cyclic oxidations of nanocrystalline Ni3Al were tested at 1173-1373 K with intervals of 100 K. The results indicate that nanocrystalline Ni3Al exhibits excellent isothermal and cyclical oxidation resistance. The oxide scales consist primarily of dense and continuous alpha-Al2O3. The g-rain refinement is beneficial for improving the oxidation resistance of Ni3Al by providing more nucleation centers for the Al2O3 formation, promoting the selective formation of Al2O3 and improving the adhesion of oxide scales to the matrix. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：1672 / 1677

页数：6

共 28 条

[1] IMPROVEMENT IN ROOM-TEMPERATURE DUCTILITY OF THE L12 TYPE INTERMETALLIC COMPOUND NI3A1 BY BORON ADDITION [J].

AOKI, K ;

IZUMI, O .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1979, 43 (12) :1190-1196

[2] EFFECT OF ALLOY GRAIN-SIZE AND SILICON CONTENT ON THE OXIDATION OF AUSTENITIC FE-CR-NI-MN-SI ALLOYS IN PURE O2 [J].

BASU, SN ;

YUREK, GJ .

OXIDATION OF METALS, 1991, 36 (3-4) :281-315

[3] HIGH-TEMPERATURE CORROSION-RESISTANCE [J].

BIRKS, N ;

MEIER, GH ;

PETTIT, FS .

JOURNAL OF METALS, 1987, 39 (12) :28-31

[4] The effect nanocrystallization on the oxide formation on Ni-11Cr-8Al alloy [J].

Chen, GF ;

Lou, HY .

SCRIPTA MATERIALIA, 2000, 43 (02) :119-122

[5] Nanocrystalline NiAl-processing, characterization and mechanical properties [J].

Choudry, MS ;

Dollar, M ;

Eastman, JA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 256 (1-2) :25-33

[6] DIFFUSION FLUXES AND CREEP OF POLYCRYSTALLINE COMPOUNDS - APPLICATION TO ALUMINA [J].

DOMINQUEZRODRIGUEZ, A ;

CASTAING, J .

SCRIPTA METALLURGICA ET MATERIALIA, 1993, 28 (10) :1207-1211

[7] Deposition of NiAl coating for improvement of oxidation resistance of cold-rolled Ni3Al foils [J].

Kim, SH ;

Oh, MH ;

Kishida, K ;

Hirano, T ;

Wee, DM .

INTERMETALLICS, 2005, 13 (02) :129-136

[8] THE THERMAL-EXPANSION OF GRAIN-BOUNDARIES [J].

KLAM, HJ ;

HAHN, H ;

GLEITER, H .

ACTA METALLURGICA, 1987, 35 (08) :2101-2104

[9] OXIDATION MECHANISM OF NI3AL CONTAINING YTTRIUM [J].

KUENZLY, JD ;

DOUGLASS, DL .

OXIDATION OF METALS, 1974, 8 (03) :139-178

[10] Long-Term Oxidation of an As-Cast Ni3Al Alloy at 900°C and 1100°C [J].

Lee, D ;

Santella, ML ;

Anderson, IM ;

Pharr, GM .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (07) :1855-1869

← 1 2 3 →