Cylindrical Al2O3/TZP functionally graded materials by EPD

被引：13

作者：

Zhao, C ^{[1
]}

Vandeperre, L ^{[1
]}

Vleugels, J ^{[1
]}

Van Der Biest, O ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Heverlee, Belgium

来源：

BRITISH CERAMIC TRANSACTIONS | 2000年 / 99卷 / 06期

关键词：

D O I：

10.1179/096797800681018

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Cylindrical Al2O3/Ce-TZP functionally graded composites were fabricated by electrophoretic deposition and pressureless sintering in air. Negatively charged Ce-TZP and Al2O3 powders were deposited on a cylindrical electrode from an acetone based suspension. A continuous composition change is realised by changing the composition of the suspension. Sintering of the FGM at different temperatures, showed that a temperature higher than 1550 degreesC was necessary for densification. The resultant FGM cylinder with 5.6 mm dia. had an ideal mechanical structure: a central open channel, a tough Ce-ZrO2 core (K-Ic > 10 MPa m(1/2)). a continuous gradient interlayer, and a hard surface layer with HV higher than 15 GPa. BCT/443.

引用

页码：284 / 287

页数：4

共 21 条

[1] FUNCTIONALLY GRADIENT LAYERS OF TI-AL BASED ALLOYS PRODUCED BY LASER ALLOYING AND CLADDING [J].

ABBOUD, JH ;

RAWLINGS, RD ;

WEST, DRF .

MATERIALS SCIENCE AND TECHNOLOGY, 1994, 10 (05) :414-419

[2] Development of an advanced ceramic tool material functionally gradient cutting ceramics [J].

Ai, X ;

Zhao, J ;

Huang, CZ ;

Zhang, JH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 248 (1-2) :125-131

[3] A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .1. DIRECT CRACK MEASUREMENTS [J].

ANSTIS, GR ;

CHANTIKUL, P ;

LAWN, BR ;

MARSHALL, DB .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1981, 64 (09) :533-538

[4]

EROGLA S, 1991, SURF COAT TECH, V49, P175

[5] THE EFFECT OF PRESSURE ON THE COMBUSTION SYNTHESIS OF A FUNCTIONALLY-GRADED MATERIAL - TIB2-AL2O3-AL CERAMIC-METAL COMPOSITE SYSTEM [J].

FENG, HJ ;

MOORE, JJ .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1993, 2 (05) :645-650

[6] METAL-CERAMIC FUNCTIONALLY GRADIENT MATERIAL PRODUCED BY LASER PROCESSING [J].

JASIM, KM ;

RAWLINGS, RD ;

WEST, DRF .

JOURNAL OF MATERIALS SCIENCE, 1993, 28 (10) :2820-2826

[7] Determination of processing-induced stresses and properties of layered and graded coatings: Experimental method and results for plasma-sprayed Ni-Al2O3 [J].

Kesler, O ;

Finot, M ;

Suresh, S ;

Sampath, S .

ACTA MATERIALIA, 1997, 45 (08) :3123-3134

[8] FORMATION OF FUNCTIONALLY GRADIENT DIAMOND FILMS [J].

KURIHARA, K ;

SASAKI, K ;

KAWARADA, M ;

GOTO, Y .

THIN SOLID FILMS, 1992, 212 (1-2) :164-168

[9] GRADED CASTING OF MATERIALS WITH CONTINUOUS GRADIENTS [J].

MARPLE, BR ;

BOULANGER, J .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1994, 77 (10) :2747-2750

[10]

MORTENSEN A, 1995, INT MATER REV, V40, P23

← 1 2 3 →