Materials transfer and formation of mechanically mixed layer in dry sliding wear of metal matrix composites against steel

被引：88

作者：

Lu, DH ^{[1
]}

Gu, MY ^{[1
]}

Shi, ZL ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, State Key Lab Met Matrix Composites, Shanghai 200030, Peoples R China

来源：

TRIBOLOGY LETTERS | 1999年 / 6卷 / 01期

基金：

中国国家自然科学基金;

关键词：

wear; debris; formation mechanism; mechanically mixed layer; metal matrix composites;

D O I：

10.1023/A:1019182817316

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The wear behavior of a composite of a pure Al matrix reinforced with 20 vol% SiC particles against quenched 1045 steel was investigated. Material was found to transfer from the counterface to the wear surface of the composite, where a mechanically mixed layer (MML) was produced. A new mechanism, named the debris burial mechanism, for the formation of the mechanically mixed layer (MML) is proposed and discussed.

引用

页码：57 / 61

页数：5

共 7 条

[1] ON THE MOTION OF MATERIAL IN THE BORDER LAYER IN SOLID-STATE FRICTION [J].

ALEXEYEV, NM .

WEAR, 1990, 139 (01) :33-48

[2] EFFECT OF SIC PARTICULATE REINFORCEMENT ON THE DRY SLIDING WEAR OF ALUMINUM SILICON ALLOYS (A356) [J].

ALPAS, AT ;

ZHANG, J .

WEAR, 1992, 155 (01) :83-104

[3] Wear of SiC-reinforced Al-matrix composites in the temperature range 20-200 degrees C [J].

Martin, A ;

Martinez, MA ;

LLorca, J .

WEAR, 1996, 193 (02) :169-179

[4] Unlubricated sliding behavior of metals [J].

Rigney, DA ;

Hammerberg, JE .

MRS BULLETIN, 1998, 23 (06) :32-36

[5] A SHEAR INSTABILITY MODEL OF SLIDING WEAR [J].

ROSENFIELD, AR .

WEAR, 1987, 116 (03) :319-328

[6] FRICTION AND WEAR OF CU-NI ALLOYS [J].

SCHELL, J ;

HEILMANN, P ;

RIGNEY, DA .

WEAR, 1982, 75 (02) :205-220

[7] The sliding wear behaviour of Al-SiC particulate composites .2. The characterization of subsurface deformation and correlation with wear behaviour [J].

Venkataraman, B ;

Sundararajan, G .

ACTA MATERIALIA, 1996, 44 (02) :461-473

← 1 →