Investigation of high-Tc bulk material for its use in resistive superconducting fault current limiters

被引:45
作者
Noe, M [1 ]
Juengst, KP
Werfel, F
Cowey, L
Wolf, A
Elschner, S
机构
[1] Forschungszentrum Karlsruhe, Phys Tech Inst, D-76021 Karlsruhe, Germany
[2] Adelwitz Technol Zentrum, Rittergut Adelwitz, D-04886 Adelwitz, Germany
[3] Alcatel High Temp Supercond, D-50351 Hurth, Germany
[4] Univ Appl Sci, D-68163 Mannheim, Germany
关键词
fault current limiter; high-Tc bulk material; SCFCL; short circuit;
D O I
10.1109/77.920236
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Superconducting fault current limiters (SCFCL) offer an attractive means to limit short-circuit currents in power systems, Comparisons of available HTS material led us to the decision to investigate melt cast processed (MCP) BSCCO and melt textured polycrystalline YBCO for use in resistive SCFCLs. As a,great length of a superconductor per unit element Is preferred, the BSCCO samples are shaped as bifilar coils prepared from tubes and the YBCO samples are manufactured in a meander shaped geometry, Test results concerning contact resistances, E-J curves, AC losses as well as the quench behaviour of the samples are presented, The experiments reveal the requirement of a high material homogeneity as the main challenge.
引用
收藏
页码:1960 / 1963
页数:4
相关论文
共 13 条
[1]   AC loss measurements in high-T-c superconductors [J].
Beghin, E ;
Bock, J ;
Duperray, G ;
Legat, D ;
Herrmann, PF .
APPLIED SUPERCONDUCTIVITY, 1995, 3 (06) :339-349
[2]  
Bock J, 1995, INST PHYS CONF SER, V148, P67
[3]   High currents in MCP BSCCO 2212 bulk material [J].
Elschner, S ;
Bock, J ;
Brommer, G ;
Herrmann, PF .
IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (04) :2724-2727
[4]  
ELSCHNER S, UNPUB ASC2000
[5]   Resistive current limiters with YBCO films [J].
Gromoll, B ;
Ries, G ;
Schmidt, W ;
Kramer, HP ;
Kummeth, P ;
Neumuller, HW ;
Fischer, S .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1997, 7 (02) :828-831
[6]   Design & development of a 15 kV, 20 kA HTS fault current limiter [J].
Leung, E ;
Burley, B ;
Chitwood, N ;
Gurol, H ;
Miyata, G ;
Morris, D ;
Ngyuen, L ;
O'Hea, B ;
Paganini, D ;
Pidcoe, S ;
Haldar, P ;
Gardner, M ;
Peterson, D ;
Boenig, H ;
Cooley, J ;
Coulter, Y ;
Hults, W ;
Mielke, C ;
Roth, E ;
Smith, J ;
Ahmed, S ;
Rodriguez, A ;
Langhorn, A ;
Gruszczynski, M ;
Hoehn, J .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2000, 10 (01) :832-835
[7]  
NOE M, 1999, I PHYS C SER, V167, P989
[8]   Test of 1.2 MVA high-Tc superconducting fault current limiter [J].
Paul, W ;
Lakner, M ;
Rhyner, J ;
Unternahrer, P ;
Baumann, T ;
Chen, M ;
Widenhorn, L ;
Guerig, A .
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 1997, 10 (12) :914-918
[9]  
PAUL W, 2000, CIGRE SESS 13 201
[10]   Development of a 7.5 MVA superconducting fault current limiter [J].
Tekletsadik, K ;
Saravolac, MP ;
Rowley, A .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1999, 9 (02) :672-675