Critical factors affecting paste flow during the stencil printing of solder paste

The paste printing process accounts for the majority of assembly defects, and most defects originate from poor understanding of the effect of printing process parameters on the printing performance. As the current product miniaturisation trend continues, area array type package solutions are now being designed into products. The assembly of these devices requires the printing of very small solder paste deposits. The printing of solder pastes through small stencil apertures typically results in stencil clogging and incomplete transfer of paste to the PCB pads. At the very narrow aperture sizes required for flip-chip applications. the paste theology becomes crucial for consistent paste withdrawal. This is because, for smaller paste volumes. surface tension effects become dominant over viscous flow. Proper understanding of the effect of the key material. equipment and process parameters, and their interactions. is crucial for achieving high print yields. During the aperture filling and emptying sub-process, the solder paste experiences forces/stresses as it interacts with the stencil aperture walls and the pad surfaces, which directly impact the paste flow within the apertures. As the substrate and stencil separate, the frictional/adhesive force on the stencil walls competes directly with the adhesives/pull force on the PCB pads, often resulting in incomplete paste transfer or skipping/clogged apertures. In this paper, we investigate the effect of stencil design on the printing process and in particular the effect on paste transfer efficiency.