Measurement of the stress sensitivity of magnetostriction in electrical steels under distorted waveform conditions

Electrical steel laminations used in the construction of transformer cores are subject to stresses introduced during their construction and analysis of the effect of this on the magnetostriction of the lamination has been investigated previously. It has been shown that higher harmonics of magnetostriction are of greater importance than the fundamental when considering transformer noise. Whereas previous studies have concentrated on the magnetostriction harmonics generated by sinusoidal magnetization, this investigation seeks to understand the relationship between harmonics present in the magnetization waveform and those in the magnetostriction waveform. A measurement system has been designed based on a similar principle to one previously described. In this case, a single Labview Virtual Instrument (VI) is used for the control of the applied stress, controlled magnetization and measurement of magnetostriction together with other magnetic parameters such as specific total loss, specific apparent power, permeability, coercivity and remanence. An adaptive digital feedback algorithm is utilized for control of arbitrary waveform which may be constructed from discrete harmonics or read from an input waveform. As well as measuring peak magnetostriction the software utilizes an FFT to calculate the harmonics of magnetostriction at each stress point. The effect of harmonics introduced into the magnetization waveform on the magnetostriction harmonics will be shown at various applied stresses. A harmonic, Harm(B) in the flux density waveform is shown to have the effect of producing a dominant harmonic in the magnetostriction given by (Harm(B)+1)/2. (c) 2008 Elsevier B.V. All rights reserved.