Forced convection of a power-law fluid in a porous channel - numerical solutions

A detailed numerical study of laminar forced convection in a porous channel which contains a fibrous medium saturated with a power-law fluid was performed. Hydrodynamic and heat transfer results are presented for a configuration that has uniform heat flux or uniform temperature heating at the walls. The flow in the porous medium was modeled using the modified Brinkman-Forchheimer-extended Darcy model for power law fluids in which the non-Darcy effects of inertia and boundary were considered. Parametric studies were conducted to examine the effects of Darcy number, power law index, inertia parameter and Prandtl number. The results indicate that when the power law index is decreased, the velocity gradient near the walls increases but these effects are reduced gradually as the Darcy number decreases until the Darcy regime (Da less than or equal to 10(-6)) is reached in which case the effects of hex is decreased, the thermal boundary layer thickness decreases significantly only in the non-Darcy regime. Consequently, as the power law index decreases, the fully developed Nusselt number increases considerably in the non-Darcy regime whereas in the Darcy regime the change in Nusselt number is very small. As the Prandtl number increases, the local Nusselt number increases and this effect is more significant for shear thinning fluids (n < 1.0).