Carbon support oxidation in PEM fuel cell cathodes

Oxidation of the cathode carbon catalyst support in polymer electrolyte fuel cells (PEMFC) has been examined. For this purpose platinum supported electrodes and pure carbon electrodes were fabricated and tested in membrane-electrode-assemblies (NMAs) in air and nitrogen atmosphere. The in situ experiments account for the fuel cell environment characterized by the presence of a solid electrolyte and water in the gas and liquid phases. Cell potential transients occurring during automotive fuel cell operation were simulated by dynamic measurements. Corrosion rates were calculated from CO2 and CO concentrations in the cathode exhaust measured by non-dispersive infrared spectroscopy (NDIR). Results from these potentiodynamic measurements indicate that different potential regimes relevant for carbon oxidation can be distinguished. Carbon corrosion rates were found to be higher under dynamic operation and to strongly depend on electrode history. These characteristics make it difficult to predict corrosion rates accurately in an automotive drive cycle. (c) 2007 Elsevier B.V. All rights reserved.