Deposition of hydroxyapatite thin films by excimer laser ablation

被引：87

作者：

Fernandez-Pradas, JM ^{[1
]}

Sardin, G ^{[1
]}

Cleries, L ^{[1
]}

Serra, P ^{[1
]}

Ferrater, C ^{[1
]}

Morenza, JL ^{[1
]}

机构：

[1] Univ Barcelona, Dept Fis Aplicada & Elect, E-08028 Barcelona, Spain

来源：

THIN SOLID FILMS | 1998年 / 317卷 / 1-2期

关键词：

hydroxyapatite thin films; excimer laser ablation; Ti-6Al-4V substrates;

D O I：

10.1016/S0040-6090(97)00629-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of the pressure of a sole water atmosphere during the pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V substrates has been studied. The rest of the technological parameters involved in the process have been fixed near the conditions where the best crystalline coatings are obtained. The pressure of the water atmosphere has been varied between 0.15 and 1.5 mbar. The films properties have been analysed by means of XRD, SEM, FT-IR spectroscopy and SIMS. An optimal region, in order to obtain thin films of highly crystalline hydroxyapatite, has been found near 0.5 mbar for the two excimer laser wavelengths (193 nm and 248 nm) used in this study. These films have a preferential orientation in the (100) direction. (C) 1998 Elsevier Science S.A.

引用

页码：393 / 396

页数：4

共 7 条

[1] BRAGRATASVILI VN, 1995, APPL PHYS LETT, V66, P2451
[2] PULSED LASER DEPOSITION OF HYDROXYLAPATITE THIN-FILMS ON TI-6AL-4V
COTELL, CM
CHRISEY, DB
GRABOWSKI, KS
SPRAGUE, JA
GOSSETT, CR
[J]. JOURNAL OF APPLIED BIOMATERIALS, 1992, 3 (02) : 87 - 93
[3] Jelinek M, 1996, LASER PHYS, V6, P144
[4] SARDIN G, 1994, HYDROXYAPATITE AND RELATED MATERIALS, P225
[5] SARDIN G, 1992, E MRS FALL M D 1 3 S
[6] Analysis of the expansion of hydroxyapatite laser ablation plumes
Serra, P
Cleries, L
Morenza, JL
[J]. APPLIED SURFACE SCIENCE, 1996, 96-8 : 216 - 221
[7] EXCIMER-LASER DEPOSITION OF HYDROXYAPATITE THIN-FILMS
SINGH, RK
QIAN, F
NAGABUSHNAM, V
DAMODARAN, R
MOUDGIL, BM
[J]. BIOMATERIALS, 1994, 15 (07) : 522 - 528

← 1 →