Dissolution rates of calcite (10(1)over-bar4) obtained by scanning force microscopy: Microtopography-based dissolution kinetics on surfaces with anisotropic step velocities

被引:128
作者
Jordan, G [1 ]
Rammensee, W [1 ]
机构
[1] Univ Koln, Inst Mineral & Geochem, D-50674 Koln, Germany
关键词
D O I
10.1016/S0016-7037(98)00030-1
中图分类号
P3 [地球物理学]; P59 [地球化学];
学科分类号
0708 ; 070902 ;
摘要
This paper reports on our use of scanning force microscopy (SFM) to study calcite dissolution rates. Until now, calculation of rates has been limited to surfaces on which steps retreat at an isotropic velocity. More commonly, on surfaces where steps in different directions retreat at different velocities, the rate depends on the velocities and the densities of the differently oriented steps. Here, we show that calculating rates from SFM image sequences is possible for anisotropic surfaces if the ratio of step lengths in different directions is constant in the analyzed images (e.g., by considering steps at nonintersecting pits exclusively). In contrast to nonintersecting pits, high velocity steps are formed at intersecting pits on the calcite (10 (1) over bar 4) surface. At these steps, material can be removed without the slow nucleation of kink sites. The morphology of these steps is not straight and they become easily pinned by particles or impurities. Therefore, measuring the velocity of step retreat directly in the images fails, but calculating the dissolution rate of surface regions with high velocity steps is still possible. Dissolution rate is roughly similar in both the deep etch pits and the areas with high velocity steps at intersecting pits. Consequently, we suggest that the formation of high velocity steps contributes considerably to the weak enhancement of the rate with increasing dislocation density because additional etch pits within the intersectional regions do not significantly increase the rate. The calculated dissolution rate of similar to 1.5 x 10(-6) mol m(-2) s(-1) on the calcite (10 (1) over bar 4) surface in water at 24 degrees C and pCO(2) = 10(-3.5) atm corresponds well to the rates obtained from batch experiments. Thus, SFM can be regarded as an instrument capable of acquiring rates even on surfaces with anisotropic step velocities. Copyright (C) 1998 Elsevier Science Ltd.
引用
收藏
页码:941 / 947
页数:7
相关论文
共 28 条
[1]  
Berner RA, 1995, REV MINERAL, V31, P565
[2]   DISSOLUTION KINETICS OF CALCIUM-CARBONATE IN SEA-WATER .4. THEORY OF CALCITE DISSOLUTION [J].
BERNER, RA ;
MORSE, JW .
AMERICAN JOURNAL OF SCIENCE, 1974, 274 (02) :108-134
[3]   Gypsum growth in the presence of background electrolytes studied by Scanning Force Microscopy [J].
Bosbach, D ;
JuntaRosso, JL ;
Becker, U ;
Hochella, MF .
GEOCHIMICA ET COSMOCHIMICA ACTA, 1996, 60 (17) :3295-3304
[4]  
BOSBACH D, 1995, EUR J MINERAL, V7, P267
[5]   IN-SITU INVESTIGATION OF GROWTH AND DISSOLUTION ON THE (010) SURFACE OF GYPSUM BY SCANNING FORCE MICROSCOPY [J].
BOSBACH, D ;
RAMMENSEE, W .
GEOCHIMICA ET COSMOCHIMICA ACTA, 1994, 58 (02) :843-849
[6]  
BUSENBERG E, 1986, US GEOL SURV B, V1578, P139
[7]   COMPARATIVE-STUDY OF THE KINETICS AND MECHANISMS OF DISSOLUTION OF CARBONATE MINERALS [J].
CHOU, L ;
GARRELS, RM ;
WOLLAST, R .
CHEMICAL GEOLOGY, 1989, 78 (3-4) :269-282
[8]   THE DISSOLUTION KINETICS OF ICELAND SPAR SINGLE-CRYSTALS [J].
COMPTON, RG ;
DALY, PJ .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1984, 101 (01) :159-166
[9]   CALCITE PRECIPITATION MECHANISMS AND INHIBITION BY ORTHOPHOSPHATE - INSITU OBSERVATIONS BY SCANNING FORCE MICROSCOPY [J].
DOVE, PM ;
HOCHELLA, MF .
GEOCHIMICA ET COSMOCHIMICA ACTA, 1993, 57 (03) :705-714
[10]   Compatible real-time rates of mineral dissolution by Atomic Force Microscopy (AFM) [J].
Dove, PM ;
Platt, FM .
CHEMICAL GEOLOGY, 1996, 127 (04) :331-338