Internal structure of nanoporous TiO2/Polyion thin films prepared by layer-by-layer deposition

The internal structure of porous TiO2 films prepared by electrostatic layer-by-layer deposition was investigated. The films were prepared by alternate dipping of solid substrates into dispersions of TiO2 nanoparticles and polycations, polyanions, or pure buffer solution, respectively. The surface charge of the amphoteric TiO2 particles was controlled by the pH of the aqueous dispersions. The morphology of the film surface was investigated by means of scanning electron microscopy. It was found that the surface roughness strongly depends on the polymeric material used for the deposition process but is independent of the ionic strength of the solution or the molecular weight of the polyions. The samples with rough surfaces feature strong light scattering. The porosity and internal structure of the TiO2/ polyelectrolyte films were investigated by adsorption/desorption of dye molecules. A crude estimate yields an internal surface that is up to 160 times the plane surface of the substrate for a film thickness of 1 mu m. The composition of the films was investigated by X-ray photoelectron spectroscopy (XPS). Detection of the XPS signal after each deposition step of the first three dipping cycles shows a significant increase of the relative surface coverage of Ti after the TiO2 deposition step and of PSS after the PSS deposition step. For later dipping cycles, such an increase was also detectable but less prominent.