Bioactive layers based on black glasses on titanium substrates

被引:32
作者
Gaweda, Magdalena [1 ]
Jelen, Piotr [1 ]
Dlugon, Elzbieta [1 ]
Wajda, Aleksandra [1 ]
Lesniak, Magdalena [1 ]
Simka, Wojciech [2 ]
Sowa, Maciej [2 ]
Detsch, Rainer [3 ]
Boccaccini, Aldo R. [3 ]
Sitarz, Maciej [1 ]
机构
[1] AGH Univ Sci & Technol, Fac Mat Sci & Ceram, Krakow, Poland
[2] Silesian Tech Univ, Fac Chem, Gliwice, Poland
[3] Univ Erlangen Nurnberg, Inst Biomat, Dept Mat Sci & Engn, Erlangen, Germany
关键词
bioceramics; biocompatibility; coating; silicon oxycarbide; sol-gel; SILICON OXYCARBIDE GLASSES; FREE-CARBON PHASE; STRUCTURAL-CHARACTERIZATION; CORROSION-RESISTANCE; THIN-FILMS; PART; COATINGS; MICROSTRUCTURE; BEHAVIOR;
D O I
10.1111/jace.15202
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
081705 [工业催化]; 082905 [生物质能源与材料];
摘要
Black glasses are amorphous materials based on silicon oxycarbide. The use of precursors in the form of ladder-like silsesquioxanes enables the control of the amount of carbon ions in the glass network by adjusting ratios of T to D structural units in precursors. In this study, four different sols precursors of four different layers of black glasses on titanium substrates were prepared. The materials were analyzed with the use of various spectroscopic and microscopic methods. Formation of continuous and hermetic layers resistant to corrosion was proven. The black glasses layers were examined as materials for biomedical applications. Therefore, preliminary tests of their bioactivity and biocompatibility were performed. The best results were obtained for the material of lower contribution of carbon ions.
引用
收藏
页码:590 / 601
页数:12
相关论文
共 54 条
[1]
Bioactive glass coatings fabricated by laser cladding on ceramic acetabular cups: a proof-of-concept study [J].
Baino, Francesco ;
Angeles Montealegre, Maria ;
Orlygsson, Gissur ;
Novajra, Giorgia ;
Vitale-Brovarone, Chiara .
JOURNAL OF MATERIALS SCIENCE, 2017, 52 (15) :9115-9128
[2]
Room-temperature synthesis of α-SiO2 thin films by UV-assisted ozonolysis of a polymer precursor [J].
Brinkmann, M ;
Chan, VZH ;
Thomas, EL ;
Lee, VY ;
Miller, RD ;
Hadjichristidis, N ;
Avgeropoulos, A .
CHEMISTRY OF MATERIALS, 2001, 13 (03) :967-972
[3]
Structure of silicon oxycarbide glasses derived from poly(methylsiloxane) and poly[methyl(phenyl)siloxane] precursors [J].
Brus, J ;
Kolár, F ;
Machovic, V ;
Svítilová, J .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2001, 289 (1-3) :62-74
[4]
ADHESIVE PROTEIN EXPRESSION ON ENDOTHELIAL-CELLS AFTER CONTACT IN-VITRO WITH POLYETHYLENE TEREPHTHALATE COATED WITH PYROLYTIC CARBON [J].
CENNI, E ;
GRANCHI, D ;
ARCIOLA, CR ;
CIAPETTI, G ;
SAVARINO, L ;
STEA, S ;
CAVEDAGNA, D ;
DILEO, A ;
PIZZOFERRATO, A .
BIOMATERIALS, 1995, 16 (16) :1223-1227
[5]
Electrical conductivity measurements as a microprobe for structure transitions in polysiloxane derived Si-O-C ceramics [J].
Cordelair, J ;
Greil, P .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (12) :1947-1957
[6]
Pulsed laser-deposited composite carbon-glass-ceramic films with improved hardness [J].
Curcio, M. ;
De Bonis, A. ;
Fosca, M. ;
Santagata, A. ;
Teghil, R. ;
Rau, J. V. .
JOURNAL OF MATERIALS SCIENCE, 2017, 52 (15) :9140-9150
[7]
Effects of composition and thermal annealing on the mechanical properties of silicon oxycarbide films [J].
Du, Ping ;
Wang, Xiaoning ;
Lin, I. -Kuan ;
Zhang, Xin .
SENSORS AND ACTUATORS A-PHYSICAL, 2012, 176 :90-98
[8]
Silicon oxycarbide glasses derived from polymer precursors [J].
Eguchi, K ;
Zank, GA .
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1998, 13 (1-3) :945-949
[9]
The influence of the pyrolysis process on mechanical parameters and tightness of the black glasses layers on titanium substrates [J].
Gaweda, M. ;
Dlugon, E. ;
Lesniak, M. ;
Kurpaska, L. ;
Simka, W. ;
Sowa, M. ;
Sitarz, M. .
CERAMICS INTERNATIONAL, 2017, 43 (14) :11345-11353
[10]
Bioactive glass coatings with hydroxyapatite and Bioglass® particles on Ti-based implants.: 1.: Processing [J].
Gomez-Vega, JM ;
Saiz, E ;
Tomsia, AP ;
Marshall, GW ;
Marshall, SJ .
BIOMATERIALS, 2000, 21 (02) :105-111